- 您現在的位置：買賣IC網 > PDF目錄367207 > HMC203 (美國訊泰微波有限公司上海代表處) 50000 SYSTEM GATE 1.8 VOLT FPGA - NOT RECOMMENDED for NEW DESIGN PDF資料下載
參數資料
| 型號： | HMC203 |
| 廠商： | 美國訊泰微波有限公司上海代表處 |
| 元件分類： | FPGA |
| 英文描述： | 50000 SYSTEM GATE 1.8 VOLT FPGA - NOT RECOMMENDED for NEW DESIGN |
| 中文描述： | GaAs MMIC雙平衡混頻器，14 - 23吉赫 |
| 文件頁數： | 4/4頁 |
| 文件大?。?/td> | 95K |
| 代理商： | HMC203 |
MICROWAVE CORPORATION
5 - 31
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
M
5
v01.0801
HMC203
GaAs MMIC DOUBLE-BALANCED
MIXER, 14 - 23 GHz
Handling Precautions
Follow these precautions to avoid permanent damage.
Cleanliness:
Handle the chips in a clean environment. DO NOT attempt to clean the chip using liquid cleaning systems.
Static Sensitivity:
Follow ESD precautions to protect against > ± 250V ESD strikes.
Transients:
Suppress instrument and bias supply transients while bias is applied. Use shielded signal and bias cables to minimize
inductive pick-up.
General Handling:
Handle the chip along the edges with a vacuum collet or with a sharp pair of bent tweezers. The surface of the
chip has fragile air bridges and should not be touched with vacuum collet, tweezers, or fingers.
Mounting
The chip is back-metallized and can be die mounted with AuSn eutectic preforms or with electrically conductive epoxy. The mounting
surface should be clean and flat.
Eutectic Die Attach:
A 80/20 gold tin preform is recommended with a work surface temperature of 255 °C and a tool temperature
of 265 °C. When hot 90/10 nitrogen/hydrogen gas is applied, tool tip temperature should be 290 °C. DO NOT expose the chip
to a temperature greater than 320 °C for more than 20 seconds. No more than 3 seconds of scrubbing should be required for
attachment.
Epoxy Die Attach:
Apply a minimum amount of epoxy to the mounting surface so that a thin epoxy fillet is observed around the
perimeter of the chip once it is placed into position. Cure epoxy per the manufacturer’s schedule.
Wire Bonding
RF bonds made with 0.003” x 0.0005” ribbon are recommended. These bonds should be thermosonically bonded with a force of 40-
60 grams. DC bonds of 0.001” (0.025 mm) diameter, thermosonically bonded, are recommended. Ball bonds should be made with
a force of 40-50 grams and wedge bonds at 18-22 grams. All bonds should be made with a nominal stage temperature of 150 °C. A
minimum amount of ultrasonic energy should be applied to achieve reliable bonds. All bonds should be as short as possible, less than
12 mils (0.31 mm).
相關PDF資料 |
PDF描述 |
|---|---|
| HMC204MS8 | GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 4 - 8 GHz INPUT |
| HMC204 | 50,000 SYSTEM GATE 1.8 VOLT FPGA - NOT RECOMMENDED for NEW DESIGN |
| HMC204C8 | GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 4 - 8 GHz INPUT |
| HMC204MS8G | GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 4 - 8 GHz INPUT |
| HMC205 | GaAs MMIC PASSIVE FREQUENCY DOUBLER, 6 - 12 GHz INPUT |
相關代理商/技術參數 |
參數描述 |
|---|---|
| HMC203_07 | 制造商:HITTITE 制造商全稱:Hittite Microwave Corporation 功能描述:GaAs MMIC DOUBLE-BALANCED MIXER, 14 - 23 GHz |
| HMC203_09 | 制造商:HITTITE 制造商全稱:Hittite Microwave Corporation 功能描述:GaAs MMIC DOUBLE-BALANCED MIXER, 14 - 23 GHz |
| HMC204 | 制造商:HITTITE 制造商全稱:Hittite Microwave Corporation 功能描述:GaAs MMIC PASSIVE FREQUENCY DOUBLER, 4 - 8 GHz INPUT |
| HMC204_08 | 制造商:HITTITE 制造商全稱:Hittite Microwave Corporation 功能描述:GaAs MMIC PASSIVE FREQUENCY DOUBLER, 4 - 8 GHz INPUT |
| HMC204_09 | 制造商:HITTITE 制造商全稱:Hittite Microwave Corporation 功能描述:GaAs MMIC PASSIVE FREQUENCY DOUBLER, 4 - 8 GHz INPUT |
發布緊急采購，3分鐘左右您將得到回復。