- 您現(xiàn)在的位置：買賣IC網 > PDF目錄353356 > HFCT-5963ATG FIBER OPTIC TRANSCEIVER PDF資料下載
參數資料
| 型號： | HFCT-5963ATG |
| 英文描述： | FIBER OPTIC TRANSCEIVER |
| 中文描述： | 光纖收發(fā)器 |
| 文件頁數： | 3/10頁 |
| 文件大?。?/td> | 224K |
| 代理商： | HFCT-5963ATG |
2
Connection Diagram
Pin Descriptions:
Pin 1 Receiver Signal Ground VEER:
Directly connect this pin to the
receiver ground plane.
Pin 2 Receiver Data Out RD:
See recommended circuit
schematic, Figure 4.
Pin 3 Receiver Data Out Bar RD:
See recommended circuit
schematic, Figure 4.
Pin 4 Signal Detect SD:
Normal optical input levels to the
receiver result in a logic “1”
output.
Low optical input levels to the
receiver result in a fault condition
indicated by a logic “0” output.
This Signal Detect output can be
used to drive a PECL input on an
upstream circuit, such as Signal
Detect input or Loss of Signal-bar.
Pin 5 Receiver Power Supply VCCR:
Provide +5 V dc via the
recommended transmitter power
supply filter circuit. Locate the
power supply filter circuit as close
as possible to the VCC pin.
Pin 6 Transmitter Power Supply VCCT:
Provide +5 V dc via the
recommended transmitter power
supply filter circuit. Locate the
power supply filter circuit as close
as possible to the VCC pin.
Pin 7 Transmitter Data In Bar TD:
See recommended circuit
schematic, Figure 4.
Pin 8 Transmitter Data In TD:
See recommended circuit
schematic, Figure 4.
Pin 9 Transmitter Signal Ground VEET:
Directly connect this pin to the
transmitter ground plane.
Mounting Studs
The mounting studs are provided
for mechanical attachment to the
circuit board. They are embedded
in the nonconductive plastic
housing and are not tied to the
transceiver internal circuit and
should be soldered into
plated-through holes on the
printed circuit board.
RECEIVER SIGNAL GROUND
RECEIVER DATA OUT
RECEIVER DATA OUT BAR
SIGNAL DETECT
RECEIVER POWER SUPPLY
TRANSMITTER POWER SUPPLY
TRANSMITTER DATA IN BAR
TRANSMITTER DATA IN
TRANSMITTER SIGNAL GROUND
o
1
2
3
4
5
6
7
8
9
Top View
N/C
相關PDF資料 |
PDF描述 |
|---|---|
| HFCT-5963ATL | 155 Mbit/s SMF (15km) 2x5 TTL SFF LC for SONET/SDH. ATM (OC-3) -40C to +85C: w/ EMI Shield |
| HFCT-5963NG | FIBER OPTIC TRANSCEIVER |
| HFCT-5963NL | 155 Mbit/s SMF (40km) 2x5 TTL SFF LC for SONET/SDH. ATM (OC-3) 0C to +70C: w/ EMI Shield |
| HHA130 | Optoelectronic |
| HHA140 | Optoelectronic |
相關代理商/技術參數 |
參數描述 |
|---|---|
| HFCT-5963ATL | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:155 Mbit/s SMF (15km) 2x5 TTL SFF LC for SONET/SDH. ATM (OC-3) -40C to +85C: w/ EMI Shield |
| HFCT-5963NG | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:FIBER OPTIC TRANSCEIVER |
| HFCT-5963NL | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:155 Mbit/s SMF (40km) 2x5 TTL SFF LC for SONET/SDH. ATM (OC-3) 0C to +70C: w/ EMI Shield |
| HFCT-5963TG | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:FIBER OPTIC TRANSCEIVER |
| HFCT-5963TL | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:155 Mbit/s SMF (15km) 2x5 TTL SFF LC for SONET/SDH. ATM (OC-3) 0C to +70C: w/ EMI Shield |
發(fā)布緊急采購，3分鐘左右您將得到回復。