- 您現在的位置：買賣IC網 > PDF目錄353189 > HFCT-5954ATL Optoelectronic PDF資料下載
參數資料
| 型號： | HFCT-5954ATL |
| 英文描述： | Optoelectronic |
| 中文描述： | 光電 |
| 文件頁數： | 3/10頁 |
| 文件大小： | 224K |
| 代理商： | HFCT-5954ATL |
2
Connection Diagram
Pin Descriptions:
Pin 1 Receiver Signal Ground VEER:
Directly connect this pin to the
receiver ground plane.
Pin 2 Receiver Data Out RD:
See recommended circuit
schematic, Figure 4.
Pin 3 Receiver Data Out Bar RD:
See recommended circuit
schematic, Figure 4.
Pin 4 Signal Detect SD:
Normal optical input levels to the
receiver result in a logic “1”
output.
Low optical input levels to the
receiver result in a fault condition
indicated by a logic “0” output.
This Signal Detect output can be
used to drive a PECL input on an
upstream circuit, such as Signal
Detect input or Loss of Signal-bar.
Pin 5 Receiver Power Supply VCCR:
Provide +5 V dc via the
recommended transmitter power
supply filter circuit. Locate the
power supply filter circuit as close
as possible to the VCC pin.
Pin 6 Transmitter Power Supply VCCT:
Provide +5 V dc via the
recommended transmitter power
supply filter circuit. Locate the
power supply filter circuit as close
as possible to the VCC pin.
Pin 7 Transmitter Data In Bar TD:
See recommended circuit
schematic, Figure 4.
Pin 8 Transmitter Data In TD:
See recommended circuit
schematic, Figure 4.
Pin 9 Transmitter Signal Ground VEET:
Directly connect this pin to the
transmitter ground plane.
Mounting Studs
The mounting studs are provided
for mechanical attachment to the
circuit board. They are embedded
in the nonconductive plastic
housing and are not tied to the
transceiver internal circuit and
should be soldered into
plated-through holes on the
printed circuit board.
RECEIVER SIGNAL GROUND
RECEIVER DATA OUT
RECEIVER DATA OUT BAR
SIGNAL DETECT
RECEIVER POWER SUPPLY
TRANSMITTER POWER SUPPLY
TRANSMITTER DATA IN BAR
TRANSMITTER DATA IN
TRANSMITTER SIGNAL GROUND
o
1
2
3
4
5
6
7
8
9
Top View
N/C
相關PDF資料 |
PDF描述 |
|---|---|
| HFCT-5954TG | Optoelectronic |
| HFCT-5954TL | Single Mode SFF Transceivers for SONET OC-12/SDH STM-4 (S4.1) Multirate w/EMI nose shield |
| HGA130 | Optoelectronic |
| HGA140 | Optoelectronic |
| HGA143 | Optoelectronic |
相關代理商/技術參數 |
參數描述 |
|---|---|
| HFCT-5954ATLZ | 功能描述:光纖發射器、接收器、收發器 OC12 IR 2X10 SFF LC EXT TEMP RoHS RoHS:否 制造商:Omron Electronics 產品:Transmitters 數據速率:3.5 Gbps 波長:850 nm 最大工作溫度: 最小工作溫度: 封裝 / 箱體: 封裝: |
| HFCT-5954TG | 功能描述:光纖發射器、接收器、收發器 OC12 IR 2x10 LC No N ose Shield RoHS:否 制造商:Omron Electronics 產品:Transmitters 數據速率:3.5 Gbps 波長:850 nm 最大工作溫度: 最小工作溫度: 封裝 / 箱體: 封裝: |
| HFCT-5954TGZ | 功能描述:光纖發射器、接收器、收發器 OC12 IR 2x10 LC No N ose Shld RoHS RoHS:否 制造商:Omron Electronics 產品:Transmitters 數據速率:3.5 Gbps 波長:850 nm 最大工作溫度: 最小工作溫度: 封裝 / 箱體: 封裝: |
| HFCT-5954TL | 功能描述:光纖發射器、接收器、收發器 OC12 IR 2x10 SFF LC RoHS:否 制造商:Omron Electronics 產品:Transmitters 數據速率:3.5 Gbps 波長:850 nm 最大工作溫度: 最小工作溫度: 封裝 / 箱體: 封裝: |
| HFCT-5954TLZ | 功能描述:光纖發射器、接收器、收發器 OC12 IR 2x10 SFF LC RoHS RoHS:否 制造商:Omron Electronics 產品:Transmitters 數據速率:3.5 Gbps 波長:850 nm 最大工作溫度: 最小工作溫度: 封裝 / 箱體: 封裝: |
發布緊急采購，3分鐘左右您將得到回復。