- 您現在的位置：買賣IC網 > PDF目錄370576 > HFCT-5903E MT-RJ Duplex Single Mode Transceiver(MT-RJ 雙工單模式收發器) PDF資料下載
參數資料
| 型號： | HFCT-5903E |
| 英文描述： | MT-RJ Duplex Single Mode Transceiver(MT-RJ 雙工單模式收發器) |
| 中文描述： | 噸，個RJ雙工單模收發器（噸，個RJ雙工單模式收發器） |
| 文件頁數： | 11/12頁 |
| 文件大?。?/td> | 161K |
| 代理商： | HFCT-5903E |
11
Figure 6. Recommended Board Layout Hole Pattern
Board Layout - Decoupling
Circuit and Ground Planes
It is important to take care in the
layout of your circuit board to
achieve optimum performance
from these transceivers. Figure 3
provides a good example of a
schematic for a power supply
decoupling circuit that works
well with these parts. It is further
recommended that a continuous
ground plane be provided in the
circuit board directly under the
transceiver to provide a low
inductance ground for signal
return current. This recommen-
dation is in keeping with good
high frequency board layout
practices.
Board Layout - Hole Pattern
The Hewlett-Packard transceiver
complies with the circuit board
“Common Transceiver Footprint”
hole pattern defined in the
original multisource announce-
ment which defined the 2 x 5
package style. This drawing is
reproduced in Figure 6 with the
addition of ANSI Y14.5M
compliant dimensioning to be
used as a guide in the mechanical
layout of your circuit board.
Figure 7 shows the front panel
dimensions associated with such
a layout.
DIMENSIONS IN MILLIMETERS (INCHES)
Notes:
1. This figure describes the recommended circuit board layout for the MT-RJ Transceiver placed at .550 spacing.
2. The hatched areas are keep-out areas reserved for housing standoffs. No metal traces or ground connection in keep-out areas.
3. 2 x 5 Transceiver module requires 16 PCB holes (10 I/O pins, 2 solder posts and 4 package grounding tabs).
Package grounding tabs should be connected to signal ground.
4. The Solder Posts should be soldered to chassis ground for mechanical integrity and to ensure footprint compatibility with other
SFF transceivers.
S
H
Holes For
Housing
Leads
13.34
(0.525)
KEEP OUT AREA
FOR PORT PLUG
7
(0.276)
7.59
(0.299)
3
(0.118)
3
(0.118)
6
(0.236)
4.57
(0.18)
17.78
(0.7)
27
(1.063)
1.778
(0.07)
7.112
(0.28)
0.81 ±0.1
(0.032 ±0.004)
3.08
(0.121)
2.29
(0.09)
7.11
(0.28)
9.59
(0.378)
3.08
(0.121)
1.4 ±0.1
(0.55 ±0.004)
1.4 ±0.1
(0.55 ±0.004)
1.4 ±0.1
(0.55 ±0.004)
10.16
(0.4)
13.97
(0.55)
MIN.
3.56
(0.14)
10.8
(0.425)
2
(0.079)
相關PDF資料 |
PDF描述 |
|---|---|
| HFCT-5905E | MT-RJ Duplex Single Mode Transceiver(MT-RJ 雙工單模式收發器) |
| HFCT-6001D | 622 Mb/s Single Mode Fiber Transceiver for ATM, SONET OC-12/SDH STM-4(應用于ATM, SONET OC-12/SDH STM-4的622 Mb/s單模式光收發器) |
| HFDOM-40LX | 40Pin Flash Disk Module for 128MB,192M, 256M, True IDE Interface Mode, 5.0V |
| HFDOM-40LX128 | 40Pin Flash Disk Module for 128MB,192M, 256M, True IDE Interface Mode, 5.0V |
| HFDOM-40LX192 | 40Pin Flash Disk Module for 128MB,192M, 256M, True IDE Interface Mode, 5.0V |
相關代理商/技術參數 |
參數描述 |
|---|---|
| HFCT5905 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:FIBER OPTIC TRANSCEIVER |
| HFCT-5905 | 制造商:HP 制造商全稱:Agilent(Hewlett-Packard) 功能描述:Agilent HFCT-5905E MT-RJ Duplex Single Mode Transceiver |
| HFCT5905E | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:FIBER OPTIC TRANSCEIVER |
| HFCT-5905E | 制造商:AGILENT 制造商全稱:AGILENT 功能描述:Agilent HFCT-5905E MT-RJ Duplex Single Mode Transceiver |
| HFCT-5908E | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:622 Mbit/s SMF (15km) SFF Transciever for SONET/SDH. ATM (OC-12): Extended shield |
發布緊急采購，3分鐘左右您將得到回復。