
Hitachi Embedded Workshop User Manual
51
Figure 3.10: Custom Options Dialog
The dialog in figure 3.10 is a custom phase options dialog. The implementation of which is slightly different
depending on whether you are using a multiple or single shot phase. On the left-hand side is the project and file
list. It is possible to select multiple projects and files in the same way as Windows explorer to modify the
options for more than one selection. On the right-hand side are the 3 options tabs. This is where you set the
options that you want to apply to the selected file(s). You can also choose which configuration information is
being viewed from the configuration list on the upper left of the dialog box. Each configuration is listed along
with a special entry named “Multiple configurations…”. If you select multiple configurations then a dialog is
displayed which allows you to select more than one configuration. This method is used throughout HEW for
modifying multiple configurations at once.
3.4.1
Options Tab
The “Options” tab (figure 3.11) allows you to define the command line options that will be passed to the phase.
The “Command” field displays the command, which was entered when you defined the phase (figure 3.3d).
Enter into the “Options” field the command line arguments that you would like to pass to the command. If you
want to insert a placeholder, select the relevant placeholder from the “Placeholder” drop-down list box and then
click the “Insert” button. For a detailed description of placeholders see appendix C, “Placeholders”.