
Table 1-1 Features (cont)
Feature
Description
16-bit integrated Five 16-bit timer channels, capable of processing up to 12 pulse outputs or 10
timer unit (ITU)
pulse inputs
16-bit timer counter (channels 0 to 4)
Two multiplexed output compare/input capture pins (channels 0 to 4)
Operation can be synchronized (channels 0 to 4)
PWM mode available (channels 0 to 4)
Phase counting mode available (channel 2)
Buffering available (channels 3 and 4)
Reset-synchronized PWM mode available (channels 3 and 4)
Complementary PWM mode available (channels 3 and 4)
Programmable
timing pattern
controller (TPC)
Maximum 16-bit pulse output, using ITU as time base
Up to four 4-bit pulse output groups (or one 16-bit group, or two 8-bit groups)
Non-overlap mode available
Watchdog
timer (WDT),
1 channel
Reset signal can be generated by overflow
Reset signal can be output externally
Usable as an interval timer
Serial
communication
interface (SCI),
2 channels
Selection of asynchronous or synchronous mode
Full duplex: can transmit and receive simultaneously
On-chip baud-rate generator
A/D converter
Resolution: 10 bits
Eight channels, with selection of single or scan mode
Variable analog conversion voltage range
Sample-and-hold function
Can be externally triggered
I/O ports
55 input/output pins
8 input-only pins
3