
Hitachi Embedded Workshop User Manual
31
2.6.3
Stopping a Build
The Hitachi Embedded Workshop allows you to halt the build process.
To stop a build:
1. Select [Build->Stop Build] or click the stop build toolbar button (
). The build will be stop after the
current file has been built.
2. Wait until the message “Build Finished” appears in the “Output” window before continuing.
To forcibly terminate a current tool
1. Select [Build->Terminate Current Tool]. The HEW will attempt to stop the tool immediately.
Note:
Do NOT assume that any output from the tool you terminated is valid. It is recommended that you delete
any output files produced and ensure that the phase is executed again.
2.6.4
Building Multiple Projects
The Hitachi Embedded Workshop lets you build multiple projects and configurations at once.
To build multiple projects:
1.
Select [Build->Build Multiple]. The figure displayed in figure 2.18.
2.
The build multiple gives you the choice of which projects and configurations should be built. To select
which projects and configurations need to be built select the check box next to the project –
configuration combination you want to build. For example, in figure 2.18 if you wanted to build the
entire “hewtest2” project you would check the “hewtest2-Debug” and the “hewtest2-Release” selections
and leave all other check boxes unchecked.
3.
When you are happy with your chosen selection click the build button and the HEW will then build the
projects and configurations you have chosen.
4.
If you want to build all the projects which you choose, you click the build all button.
5.
Results from the build are displayed in the build window in the same way as the normal build process.
Figure 2.18: Build Multiple Dialog
2.6.5
The Output Window
When a tool executes (i.e. compiler, assembler, linker etc.) its output is displayed in the “Output” window. If any
of the tools produce any errors or warnings then they are displayed along with the source file name and the line
number at which the error is located. To quickly locate a specific bug, double click on a given error/warning to
invoke the current editor.