
Hitachi Embedded Workshop User Manual
48
3.3.1
Build Phase Order
The “Build Order” tab (figure 3.6) displays the current order in which phases will be executed when the build
(
) or build all (
) operation is selected. The check box to the left of each phase indicates whether or not it is
currently enabled. By clicking this box, the phase can be toggled on or off.
Figure 3.6: Build Phases Dialog Build Order Tab
In addition the following operations can be performed:
To remove a phase:
1. Select the phase that you would like to remove.
2. Click the “Remove” button.
To view the properties of a system phase:
1. Select the system phase that you would like to examine.
2. Click the “Modify…” button.
To move a phase:
1. Select the phase that you would like to move.
2.
Click the “Move Up” or “Move Down” button.
To import a phase:
1.
Click the import button. A dialog is displayed which allows the user to browse to an existing project to
import a custom phase from.
2.
Choose the location of the project you wish to import a custom phase from. Once selected a dialog is
displayed which lists the custom phases in the imported project.
3.
Selecting a phase name and then clicking properties displays the custom phase details. This allows you
to decide whether the phase does the functionality you require.
4.
Once you have decided which phase to import highlight it in the list and then click OK. The phase will
then be added to the build phases dialog at the bottom of the build order.