
Hitachi Embedded Workshop User Manual
256
Note: The memory map setting for the area allocated to a system memory resource cannot be deleted or
modified. First delete the system memory resource allocation with the [Simulator Memory
Resource] dialog box, then delete or modify the memory map setting.
4.21.3
Simulator Memory Resource Dialog Box
This dialog box displays the target CPU information, and sets and modifies memory resources.
Figure 4.85 Simulator Memory Resource Dialog Box
The following items are specified:
[System Configuration]
Displays the target CPU, address bus width, and execution mode of the
simulator/debugger.
[System memory resource] Displays the access type, start address, and end address of the current memory
resources.
[Memory map]
Displays the start address, end address, memory type, data bus width, and access
cycles as memory information.
[System memory resource] can be specified, modified, and deleted using the following buttons:
[Add]
Specifies [System memory resource] items. Clicking this button opens the [System
Memory Resource Modify] dialog box, and [System memory resource] items can be
specified.
[Modify]
Modifies [System memory resource] items. Select an item to be modified in the list box and
click this button. The [System Memory Resource Modify] dialog box opens and [System
memory resource] items can be modified.
[Delete]
Deletes [System memory resource] items. Select an item to be deleted in the list box and
click this button.
Note that the [Reset] button can reset the [Memory map] and [System memory resource] to the default value.
Clicking the [Close] button closes this dialog box. [System memory resource] contains the same setting
information as [Memory resource] on the [Simulator] sheet in the [Hitachi H8S, H8/300 Standard Toolchain]
dialog box. For details on the [Hitachi H8S, H8/300 Standard Toolchain] dialog box, refer to section 3.3.1,
Memory Map.
4.21.4
System Memory Resource Modify Dialog Box
The [System Memory Resource Modify] dialog box sets and modifies memory resources.