
Hitachi Embedded Workshop User Manual
174
can choose to modify the settings for one or more sessions at once. The [Debug Settings] dialog box displays the
following debug options:
Current debug target for the current project and session selection
Download modules for the current project and session selection
The download module list displays the order in which the files will be downloaded to the target. It is possible to
add, remove, modify, move up, and move down modules in this list.
To add a new download module:
1. Select [Options -> Debug Settings…]. The dialog box shown in figure 3.16 will be displayed.
2. Select the project and configurations you are interested in adding a download module to in [tree control].
3. Click the [Add] button. The dialog box displayed in figure 3.15 is displayed.
4. The [Format] list box contains a list of supported object format readers. This allows you to choose the
correct reader for the download module you wish to add to the project.
5. The [Filename] field allows you to browse to the download module on your disk, or simply type it into
[edit control] if you have not yet built the module.
6. Enter an offset address to the [Offset] field (suitable only for some object formats).
7. When the user clicks the [OK] button, the debug download module is added to the bottom of the list. If
you wish to position the module in a different position in relation to the other modules, select the module
and then use the [Up] and [Down] buttons to position the module correctly.
Figure 3.15 Download Module Dialog Box