
Hitachi Embedded Workshop User Manual
253
4.20.1
Setting a Trigger Button
Choose [Setting...] from the pop-up menu to open the [Trigger Setting] dialog box and to specify the details of
the pseudo-interrupt to be generated by pressing each trigger button.
Figure 4.82 Trigger Setting Dialog Box
This dialog box allows the user to specify the details of the pseudo-interrupt to be generated by pressing each
trigger button.
[Trigger No.]
Selects a trigger button to specify details
[Name]
Specifies the name of the selected trigger button, which will be displayed in the [Trigger]
window
[Enable]
Enables the trigger button when this box is checked.
[Interrupt Type1] Specifies the Interrupt vector number. (0 to H’FF)
[Priority]
Interrupt priority. (0 to H’11)
Whether or not the interrupt is accepted is determined by the CPU’s specification of the
selected debugging platform. However, when H’8 or larger is specified for the priority,
interrupts are always accepted.
Clicking the [OK] button stores the setting. Clicking the [Cancel] button closes this dialog box without setting
the details of the interrupt.
Note: If the [Cancel] button is clicked after multiple trigger button settings are modified, the
modifications of all those buttons are canceled.
4.20.2
Changing the Size of Trigger Buttons
Specify the size of trigger buttons displayed in the [Trigger] window in the [Size] submenu in the pop-up menu.
[Large], [Normal], or [Small] can be selected.
4.21
Modifying the Simulator/Debugger Settings
This section describes how to modify the simulator system settings after the simulator/debugger is started.