
Hitachi Embedded Workshop User Manual
191
The source start address and end address selected in the [Memory] window will be displayed in the [Begin] and
[End] fields. Checking the [Verify] check box enables copying while comparing the copy source and copy
destination. The copy unit can be selected in the [Format] list box. Enter the destination start address in the
[Destination] field and click the [OK] button or press the Enter key. This will close the dialog box and copy the
memory block to the new address.
4.2.10
Saving and Verifying a Memory Area
A memory area in the address space can be saved into a disk file using the memory save function. Open the
[Save Memory As] dialog box by choosing [File -> Save memory...].
Figure 4.14 Save Memory As Dialog Box
Enter the start and end addresses of the memory block that you wish to save, and a name and format for the file.
The [File name] drop-down list contains the previous four file names used for saving memory.
Clicking the [Browse…] button can open the standard [File Save As] dialog box. On clicking the [OK] button or
pressing the Enter key, the dialog box closes and the memory block will be saved into the disk as a file of the
specified format type. When file saving has completed, a confirmation message box may be displayed.
A memory area in the address space can be verified using the memory verify function. Open the [Verify
Memory] dialog box by choosing [File -> Verify Memory...].
Figure 4.15 Verify Memory Dialog Box