參數資料
型號： HCD66710A00
廠商： Hitachi,Ltd.
英文描述： (Dot Matrix Liquid Crystal Display Controller/Driver)
中文描述： （點陣式液晶顯示控制器/驅動器）
文件頁數： 33/73頁
文件大?。?/td> 507K
代理商： HCD66710A00
HD66710
323
Instruction Description
Clear Display
Clear display writes space code (20)H (character pattern for character code (20)H must be a blank
pattern) into all DDRAM addresses. It then sets DDRAM address 0 into the address counter, and returns
the display to its original status if it was shifted. In other words, the display disappears and the cursor or
blinking goes to the left edge of the display (in the first line if 2 lines are displayed). It also sets I/D to 1
(increment mode) in entry mode. S of entry mode does not change. It resets the extended register enable
bit (RE) to 0 in function set.
Return Home
Return home sets DDRAM address 0 into the address counter, and returns the display to its original status
if it was shifted. The DDRAM contents do not change.
The cursor or blinking go to the left edge of the display (in the first line if 2 lines are displayed). It resets
the extended register enable bit (RE) to 0 in function set. In addition, flicker may occur in a moment at
the time of this instruction issue.
Entry Mode Set
I/D:
Increments (I/D = 1) or decrements (I/D = 0) the DDRAM address by 1 when a character code is
written into or read from DDRAM.
The cursor or blinking moves to the right when incremented by 1 and to the left when decremented by 1.
The same applies to writing and reading of CGRAM and SEGRAM.
S:
Shifts the entire display either to the right (I/D = 0) or to the left (I/D = 1) when S is 1 during DDRAM
write. The display does not shift if S is 0.
If S is 1, it will seem as if the cursor does not move but the display does. The display does not shift when
reading from DDRAM. Also, writing into or reading out from CGRAM and SEGRAM does not shift the
display. In a low power mode (LP = 1), do not set S = 1 because the whole display does not normally
shift.
Display On/Off Control
When extension register enable bit (RE) is 0, bits D, C, and B are accessed.
D:
The display is on when D is 1 and off when D is 0. When off, the display data remains in DDRAM,
but can be displayed instantly by setting D to 1.
C:
The cursor is displayed when C is 1 and not displayed when C is 0. Even if the cursor disappears, the
function of I/D or other specifications will not change during display data write. The cursor is displayed
using 5 dots in the 8th line for 5
×
8 dot character font.
相關PDF資料
PDF描述
HCD66712UA02 Dot-Matrix Liquid Crystal Display Controller/Driver
HCD66712UA03 Dot-Matrix Liquid Crystal Display Controller/Driver
HCD66712UA03BP Dot-Matrix Liquid Crystal Display Controller/Driver
HCD66717A13BP TRANSISTOR,BJT,NPN,700V V(BR)CEO,8A I(C),TO-247VAR
HCD66717A03 (Low-Power Dot-Matrix Liquid Crystal Display Controller/Driver)
相關代理商/技術參數
參數描述
HCD66712UA02 制造商:HITACHI 制造商全稱:Hitachi Semiconductor 功能描述:Dot-Matrix Liquid Crystal Display Controller/Driver
HCD66712UA03 制造商:HITACHI 制造商全稱:Hitachi Semiconductor 功能描述:Dot-Matrix Liquid Crystal Display Controller/Driver
HCD66712UA03BP 制造商:HITACHI 制造商全稱:Hitachi Semiconductor 功能描述:Dot-Matrix Liquid Crystal Display Controller/Driver
HCD66717A03 制造商:HITACHI 制造商全稱:Hitachi Semiconductor 功能描述:(Low-Power Dot-Matrix Liquid Crystal Display Controller/Driver)
HCD66717A03BP 制造商:HITACHI 制造商全稱:Hitachi Semiconductor 功能描述:(Low-Power Dot-Matrix Liquid Crystal Display Controller/Driver)
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*