參數資料
型號: HAL560UA-E
廠商: MICRONAS SEMICONDUCTOR HOLDING AG
元件分類: 霍爾效應傳感器
英文描述: Two-Wire Hall Effect Sensor Family
中文描述: 雙線霍爾效應傳感器系列
文件頁數: 3/21頁
文件大?。?/td> 231K
代理商: HAL560UA-E
HAL55x, HAL56x
3
Micronas
Two-Wire Hall Effect Sensor Family
in CMOS technology
Release Notes: Revision bars indicate significant
changes to the previous edition.
1. Introduction
This sensor family consists of different two-wire Hall
switches produced in CMOS technology. All sensors
change the current consumption depending on the ex-
ternal magnetic field and require only two wires between
sensor and evaluation circuit. The sensors of this family
differ in the magnetic switching behavior and switching
points.
The sensors include a temperature-compensated Hall
plate with active offset compensation, a comparator, and
a current source. The comparator compares the actual
magnetic flux through the Hall plate (Hall voltage) with
the fixed reference values (switching points). According-
ly, the current source is switched on (high current
consumption) or off (low current consumption).
The active offset compensation leads
to constant mag-
netic characteristics in the full
supply voltage and tem-
perature range. In addition, the magnetic parameters
are robust against mechanical stress effects.
The sensors are designed for industrial and automotive
applications and operate with supply voltages from 4 V
to 24 V in the junction temperature range from –40
°
C up
to 170
°
C. All sensors are available in the SMD-package
SOT-89B and in the leaded version TO-92UA.
1.1. Features:
– current output for two-wire applications
– junction temperature range from –40
°
C up to 170
°
C.
– operates from 4 V to 24 V supply voltage
– operates with static magnetic fields and dynamic mag-
netic fields up to 10 kHz
– switching offset compensation at typically 145 kHz
– overvoltage and reverse-voltage protection
– magnetic characteristics are robust against mechani-
cal stress effects
– constant magnetic switching points over a wide supply
voltage range
– the decrease of magnetic flux density caused by rising
temperature in the sensor system is compensated by
a built-in negative temperature coefficient of the mag-
netic characteristics
– ideal sensor for applications in extreme automotive
and industrial environments
– EMC corresponding to DIN 40839
1.2. Family Overview
The types differ according to the mode of switching and
the magnetic switching points.
Type
Switching
Behavior
Sensitivity
see
Page
556
unipolar
very high
12
560
unipolar
inverted
low
14
566
unipolar
inverted
very high
16
Unipolar Switching Sensors:
The sensor turns to high current consumption with the
magnetic south pole on the branded side of the package
and turns to low consumption if the magnetic field is
removed. The sensor does not respond to the magnetic
north pole on the branded side.
Unipolar Inverted Switching Sensors:
The sensor turns to low current consumption with the
magnetic south pole on the branded side of the package
and turns to high consumption if the magnetic field is
removed. The sensor does not respond to the magnetic
north pole on the branded side.
相關PDF資料
PDF描述
HAL560UA-K Two-Wire Hall Effect Sensor Family
HAL566 Two-Wire Hall Effect Sensor Family
HAL566SF-A Two-Wire Hall Effect Sensor Family
HAL566SF-E Two-Wire Hall Effect Sensor Family
HAL566SF-K Two-Wire Hall Effect Sensor Family
相關代理商/技術參數
參數描述
HAL560UA-K 制造商:MICRONAS 制造商全稱:MICRONAS 功能描述:Two-Wire Hall Effect Sensor Family
HAL566 制造商:MICRONAS 制造商全稱:MICRONAS 功能描述:Two-Wire Hall Effect Sensor Family
HAL566S-C 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Hall-Effect Switch
HAL566S-E 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Hall-Effect Switch
HAL566SF-A 制造商:MICRONAS 制造商全稱:MICRONAS 功能描述:Two-Wire Hall Effect Sensor Family