參數資料
型號: HAL518E
廠商: Electronic Theatre Controls, Inc.
英文描述: Hall Effect Sensor Family
中文描述: 霍爾效應傳感器系列
文件頁數: 3/44頁
文件大?。?/td> 315K
代理商: HAL518E
HAL5xx
3
Micronas
Hall Effect Sensor Family
in CMOS technology
Release Notes: Revision bars indicate significant
changes to the previous edition.
1. Introduction
The HAL5xx family consists of different Hall switches
produced in CMOS technology. All sensors include a
temperature-compensated Hall plate with active offset
compensation, a comparator, and an open-drain output
transistor. The comparator compares the actual mag-
netic flux through the Hall plate (Hall voltage) with the
fixed reference values (switching points). Accordingly,
the output transistor is switched on or off.
The sensors of this family differ in the switching behavior
and the switching points.
The active offset compensation leads
to constant mag-
netic characteristics over supply voltage and tempera-
ture range. In addition, the magnetic parameters are ro-
bust against mechanical stress effects.
The sensors are designed for industrial and automotive
applications and operate with supply voltages from
3.8 V to 24 V in the ambient temperature range from
–40
°
C up to 150
°
C.
All sensors are available in a SMD-package (SOT-89B)
and in a leaded version (TO-92UA).
1.1. Features:
– switching offset compensation at typically 62 kHz
– operates from 3.8 V to 24 V supply voltage
– overvoltage protection at all pins
– reverse-voltage protection at V
DD
-pin
– magnetic characteristics are robust against mechani-
cal stress effects
– short-circuit protected open-drain output by thermal
shut down
– operates with static magnetic fields and dynamic mag-
netic fields up to 10 kHz
– constant switching points over a wide supply voltage
range
– the decrease of magnetic flux density caused by rising
temperature in the sensor system is compensated by
a built-in negative temperature coefficient of the mag-
netic characteristics
– ideal sensor for applications in extreme automotive
and industrial environments
– EMC corresponding to DIN 40839
1.2. Family Overview
The types differ according to the magnetic flux density
values for the magnetic switching points, the tempera-
ture behavior of the magnetic switching points, and the
mode of switching.
Type
Switching
Behavior
Sensitivity
see
Page
501
bipolar
very high
14
502
latching
high
16
503
latching
medium
18
504
unipolar
medium
20
505
latching
low
22
506
unipolar
high
24
508
unipolar
medium
26
509
unipolar
low
28
516
unipolar with
inverted output
high
30
517
unipolar with
inverted output
medium
32
518
unipolar with
inverted output
medium
34
519
unipolar with
inverted output
(north polarity)
high
36
523
unipolar
low
38
Latching Sensors:
The output turns low with the magnetic south pole on the
branded side of the package and turns high with the
magnetic north pole on the branded side. The output
does not change if the magnetic field is removed. For
changing the output state, the opposite magnetic field
polarity must be applied.
Bipolar Switching Sensors:
The output turns low with the magnetic south pole on the
branded side of the package and turns high with the
magnetic north pole on the branded side. The output
state is not defined for all sensors if the magnetic field is
removed again. Some sensors will change the output
state and some sensors will not.
相關PDF資料
PDF描述
HAL518K Hall Effect Sensor Family
HAL519 Hall Effect Sensor Family
HAL523 Hall Effect Sensor Family
HAL523A Hall Effect Sensor Family
HAL523E Hall Effect Sensor Family
相關代理商/技術參數
參數描述
HAL518K 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Hall Effect Sensor Family
HAL519 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Hall Effect Sensor Family
HAL519SF-A 制造商:MICRONAS 制造商全稱:MICRONAS 功能描述:Hall-Effect Sensor Family
HAL519SF-K 制造商:MICRONAS 制造商全稱:MICRONAS 功能描述:Hall-Effect Sensor Family
HAL519UA-A 制造商:MICRONAS 制造商全稱:MICRONAS 功能描述:Hall-Effect Sensor Family