Solid-state Multi-functional Timer
H3CR-A
B-111
T
I
Accessories (Order Separately)
Note: 1.
Y92A-48G is a finger safe terminal cover which is attached to the P3G-08 or P3GA-11 Socket.
2.
The Time Setting Ring and Panel Cover are sold together.
3.
Hold-down Clips are sold in sets of two.
Specifications
I
General
*The internal circuits are optically isolated from the output. This enables universal application as NPN or PNP transistor.
Name/specifications
Models
Flush Mounting Adapter
Y92F-30
Y92F-73
Y92F-74
PFP-50N
PFP-100N
PFP-100N2
PFP-M
PFP-S
Y92A-48B
P2CF-08
P2CF-08-E
P2CF-11
P2CF-11-E
P3G-08
P3G-08 with Y92A-48G (see note 1)
P3GA-11
P3GA-11 with Y92A-48G (see note 1)
Y92S-27
Y92S-28
Y92P-48GL
Y92P-48GB
Y92P-48GM
Y92H-7
Y92H-8
Mounting Track
50 cm (
l
) x 7.3 mm (t)
1 m (
l
) x 7.3 mm (t)
1 m (
l
) x 16 mm (t)
End Plate
Spacer
Protective Cover
Track Mounting/
Front Connecting Socket
8-pin
8-pin, finger safe type
11-pin
11-pin, finger safe type
8-pin
8-pin, finger safe type
11-pin
11-pin, finger safe type
Setting a specific time
Limiting the setting range
Light gray (5Y7/1)
Black (N1.5)
Medium gray (5Y5/1)
For PL08 and PL11 Sockets
For PF085A Socket
Back Connecting Socket
Time Setting Ring
Panel Cover (see note 2)
Hold-down Clip (see note 3)
Item
H3CR-A/-AS
H3CR-AP
H3CR-A8/-A8S
A: ON-delay (power supply start)
B2: Flicker ON start (power supply start)
E: Interval (power supply start)
J:
One-shot (power supply start)
H3CR-A8E
Operating mode
A: ON-delay
B: Flicker OFF start
B2: Flicker ON start
C: Signal ON/OFF-delay
D: Signal OFF-delay
E: Interval
G: Signal ON/OFF-delay (Only for H3CR-A-300)
J:
One-shot (Only for H3CR-A-300)
11-pin
No-voltage input
H3CR-A/-A8/-AP:Relay output (DPDT)
H3CR-AS/-A8S: Transistor output (NPN/PNP universal)*
---
Pin type
Input type
Time-limit output type
8-pin
---
Voltage input
Relay output (SPDT)
Instantaneous output
type
Mounting method
Approved standards
Relay output (SPDT)
DIN track mounting, surface mounting, and flush mounting
UL508, CSA C22.2 No.14, NK, Lloyds
Conforms to EN61812-1 and IEC60664-1 (VDE0110) 4kV/2.
Output category according to EN60947-5-1 for Timers with Contact Outputs.
Output category according to EN60947-5-2 for Timers with Transistor Outputs.