![](http://datasheet.mmic.net.cn/190000/H1553-3_datasheet_14912969/H1553-3_18.png)
TWO PEARL BUCK COURT
l BRISTOL, PA 19007-6812 l TEL 215-781-6400 l FAX 215-781-6403 l www.pulsespecialty.com
Low Power Pulse Transformers — 18
These non-QPL interface transformers are built and tested in ISO
9002 approved facilities. They conform to all electrical and physi-
cal parameters of MIL-PRF-21038/27. Choose one of three operat-
ing temperature ranges including 0
O to +70O C, -40O to +85O C, or
-55
O to +125O C.
n dual ratio, single interface (see schematic)
n through the board package
n for use in MIL-STD-1553 applications
n standard height, 0.250 in.
n performance to MIL-PRF-21038/27 requirements
n built in ISO 9002 facility
Value Series (COTS)
through the board MIL-PRF-21038
Interface Transformers
SUMMARY PERFORMANCE SPECIFICATIONS
Impedance.................................................................................. see table, next page
Droop.............................................................................................................. < 20%
Overshoot.................................................................................................. + 1V max
Common mode rejection (CMR)................................................................. > 45 dB
Frequency range (no load)............................................................. 75 kHz to 1MHz
Operating temperature range......................................... see table, next page
Weight....................................................................................................... < 5 grams
Insulation resistance (min)........................................... 10K megohms @ 250 Vdc
Dielectric withstanding voltage................................................................ 100 Vrms
0
O to 70OC
-40
O to +85OC
-55
O to +125OC
prefix
operating temp.
N
C
TQ
The transformer package shown
on this page is also available fully
qualified to MIL-PRF-21038/27
requirements.
APPLICABLE SPECIFICATIONS
n MIL-STD-1553B
n MIL-STD-202
n MIL-T-10727
n MIL-PRF-21038
n ISO 9002
PULSE SPECIALTY COMPONENTS