參數資料
型號： GMS81C5032-XXXQT
英文描述： MICROCONTROLLER|8-BIT|CMOS|QFP|44PIN|PLASTIC
中文描述： 單片機| 8位|的CMOS | QFP封裝| 44PIN |塑料
文件頁數： 56/93頁
文件大?。?/td> 853K
代理商： GMS81C5032-XXXQT
GMS81C1404/GMS81C1408
54
June. 2001 Ver 1.2
16. ANALOG TO DIGITAL CONVERTER
The analog-to-digital converter (A/D) allows conversion
of an analog input signal to a corresponding 8-bit digital
value. The A/D module has eight analog inputs, which are
multiplexed into one sample and hold. The output of the
sample and hold is the input into the converter, which gen-
erates the result via successive approximation.
The analog reference voltage is selected to V
DD
or AVref
by setting of the bit AVREFS in RBFUNC register. If ex-
ternal analog reference AVref is selected, the bit ANSEL0
should not be set to “1”, because this pin is used to an an-
alog reference of A/D converter.
The A/D module has two registers which are the control
register ADCM and A/D result register ADCR. The
ADCM register, shown in Figure 16-2 , controls the oper-
ation of the A/D converter module. The port pins can be
configure as analog inputs or digital I/O.
To use analog inputs, each port is assigned analog input
port by setting the bit ANSEL[7:0] in RAFUNC register.
And selected the corresponding channel to be converted by
setting ADS[2:0].
The processing of conversion is start when the start bit
ADST is set to “1”. After one cycle, it is cleared by hard-
ware. The register ADCR contains the results of the A/D
conversion. When the conversion is completed, the result
is loaded into the ADCR, the A/D conversion status bit
ADSF is set to “1”, and the A/D interrupt flag ADIF is set.
The block diagram of the A/D module is shown in Figure
16-1 . The A/D status bit ADSF is set automatically when
A/D conversion is completed, cleared when A/D conver-
sion is in process. The conversion time takes maximum 10
uS (at fxin=8 MHz).
Figure 16-1 A/D Converter Block Diagram
RB0/AN0/AVref
ANSEL0 (RAFUNC.0)
RA1/AN1
ANSEL1
RA2/AN2
ANSEL2
RA3/AN3
ANSEL3
RA4/AN4
ANSEL4
RA5/AN5
ANSEL5
RA6/AN6
ANSEL6
RA7/AN7
ANSEL7
000
001
010
011
100
101
110
111
V
DD
Pin
1
0
AVREFS (RBFUNC.0)
ADEN
S/H
Successive
Approximation
Circuit
ADIF
Resistor
Ladder
Circuit
ADS[2:0]
ADCR(8-bit)
Sample & Hold
A/D Interrupt
ADDRESS : EBH
RESET VALUE : Undefined
A/D Result Register
相關PDF資料
PDF描述
GMS81C5032-XXXSK MICROCONTROLLER|8-BIT|CMOS|DIP|28PIN|PLASTIC
GMS81C7208 NET CENTER 48" W
GMS81C7208LQ 8-BIT SINGLE-CHIP MICROCONTROLLERS
GMS81C7208Q 8-BIT SINGLE-CHIP MICROCONTROLLERS
GMS81C7216 8-BIT SINGLE-CHIP MICROCONTROLLERS
相關代理商/技術參數
參數描述
GMS81C5032-XXXSK 制造商:未知廠家 制造商全稱:未知廠家 功能描述:MICROCONTROLLER|8-BIT|CMOS|DIP|28PIN|PLASTIC
GMS81C5108 制造商:HYNIX 制造商全稱:Hynix Semiconductor 功能描述:HYNIX SEMICONDUCTOR INC. 8-BIT SINGLE-CHIP MICROCONTROLLERS
GMS81C5108-UDXXX 制造商:HYNIX 制造商全稱:Hynix Semiconductor 功能描述:MICROCONTROLLER|8-BIT|CMOS|QFP|80PIN|PLASTIC
GMS81C7008 制造商:HYNIX 制造商全稱:Hynix Semiconductor 功能描述:HYNIX SEMICONDUCTOR INC. 8-BIT SINGLE-CHIP MICROCONTROLLERS
GMS81C7008K 制造商:HYNIX 制造商全稱:Hynix Semiconductor 功能描述:HYNIX SEMICONDUCTOR INC. 8-BIT SINGLE-CHIP MICROCONTROLLERS
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*