
2008 Corning Gilbert Inc. G-1400-720 09/08
Corning Gilbert Inc.
Broadband Products
5310 W. Camelback Rd.
Glendale, AZ 85301 U.S.A.
phone:
800 528 5567 (U.S. and Canada)
(01) 623 245 1050 (International)
fax:
800 344 6358
(01) 623 931 0684
website: www.corning.com/corninggilbert
e-mail:
info-gilbert@corning.com
Product Features and Benefits
Uses standard compression
tools; no custom tooling required
Improved visibility when installing
connector—dielectric is visible at post,
making it easier to install
Center conductor can be trimmed after
connector installation, assuring proper
length
Finger tightening during indoor or
outdoor installations is facilitated with
improved grip on connector nut
Soft UV and ozone resistant seal that
conforms to the port
Reusable; seal may be removed with-
out damaging the connector or seal
Seal ring doesn’t drag when installing
the connector onto tap port, allowing
easy installation
One piece construction with seal ring
attached to the connector; eliminates
waste from lost components, including
lost or dropped seal rings
Seal ring does not get contaminated
with dirt & sand when loose in the
pouch; interior is kept free from
debris while attached to the connector
Sealing system passes the SCTE
interface moisture migration
test (SCTE IPS TP 013)
A free-spinning sealed nut design
(Patent #5975951) permits the
7/16” nut to spin freely for easy
installation; the o-ring seals when
nut is tightened
360° radial compression
(patent
#7,018,235 & 7,182,639) at the
connector/cable interface provides
excellent RF shielding and prevents
moisture migration
Exposed components constructed
of Brass
One step cable preparation
Cable series permanently marked on
connector for easy identification
Materials and Construction
of Connector Components
Body, Compression Ring and
Nut:
Brass Alloy with Nickel Plating
Post:
Brass Alloy with Bright Acid
Tin Plating
Gripping Member:
Black UV Resistant Polymer
Seal Ring:
Black UV Resistant Silicone
Cable Preparation
One step cable preparation
of 1/4 ”[6.5 mm ] Braid and
Dielectric and 5/16: [8.0 mm ]
center conductor
Ordering Information
Part Number
Cable Type
Braid Coverage
Pkg. Qty
Prep. Tool
Compression Tool
GF-UR-59-SR
Series 59
60% to Quad
100 Pieces
G-CPT-6590
G-CAT-AS
G-SDT-596-250
G-8800-US
G-9000-US
GF-UR-6-SR
Series 6
60% to Quad
100 Pieces
G-CPT-6590
G-CAT-AS
G-SDT-596-250
G-8800-US
G-9000-US
1/4 [6.4 mm]
5/16 [7.9mm]
1/4 [6.4 mm]
1.21 [30.8]
.44 [11.1]
7/16 [11.1] HEX
“F” MALE
INTERFACE
3/8-32 THD