![](http://datasheet.mmic.net.cn/180000/FX5-68S2A-DSAL_datasheet_11300916/FX5-68S2A-DSAL_2.png)
A207
Insulator
Polyamide
Beige
UL94V-0
Header Contact
Brass
Contact area : Gold plated
________
Receptacle Contact
Phosphor bronze
Lead area : Tin-lead plated
________
1. Insulation Resistance
100M ohms min.
250V DC
2. Withstanding voltage
No flashover or insulation breakdown.
300V AC/1 minute
3. Contact Resistance
50m ohms max.
100mA
4. Vibration
No electrical discontinuity of 1s or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
5. Moisture Resistance
Contact resistance: 60m ohms max. Insulation resistance: 100M ohms min.
96 hours at temperature of 40 and humidity of 90% to 95%
6. Temperature Cycle
Contact resistance: 60m ohms max.
(-55: 30 minutes, 15 to 35: 2 to 3 minutes
Insulation resistance: 100M ohms min.
(-85: 30 minutes, 15 to 35: 2 to 3minutes) 5 cycles
7. Durability (Mating/un-mating) Contact resistance: 60m ohms max.
500 cycles
8. Resistance to Soldering heat
No deformation of components affecting performance.
Reflow: At the recommended temperature profile
Manual soldering: 300 for 3 seconds
sProduct Specifications
Rating
Current rating
0.5A
Operating Temperature Range
-55 to +85 (Note 1) Storage Temperature Range -10 to +60 (Note 2)
Voltage rating 100V AC
Operating Humidity Range
40% to 80%
Storage Humidity Range
40% to 70%
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note : The black dots on the insulater will not affect performance.
Note: The 56 contact header is for SH 3 type only.
Item
Specifications
Condition
sMaterial
Part
Material
Finish
Remarks
sOrdering Information
qHeader
t Connector Height
Blank
: 6.5mm
3
: 9.5mm
q Series Name
: FX5
w Number of Contacts : 20, 40, 52, 56, 68, 80
e Connector Type
P: Header
r Contact type
SH
: Right angle SMT type
FX5
– * P – SH 3
qReceptacle
y Contact type
DSA
: Straight through hole type
u Board prefixed pin
Blank
: Without board prefixed pin
L
: With board Prefixed pin
q Series Name
: FX5
w Number of Contacts : 20, 40, 52, 56, 68, 80
e Connector Type
S: Receptacle
r Contact Sequence
2
: 2 Stages Sequence
t Serial No. : A
FX5
– * S 2 A – DSA L
qw e
r
t
y
u
qw
e
r
t
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.