![](http://datasheet.mmic.net.cn/Fairchild-Semiconductor/FSUSB31L8X_datasheet_97392/FSUSB31L8X_1.png)
FSUSB31
—
Low-Power
,Si
ngle-Port,
High-S
p
eed
US
B
2.0
(480Mbp
s)
Switch
2006 Fairchild Semiconductor Corporation
www.fairchildsemi.com
FSUSB31 Rev. 1.1.0
February 2009
FSUSB31
Low-Power, Single-Port, High-Speed USB 2.0 (480Mbps)
Switch
Features
■ Low On Capacitance: 3.7pF (Typical)
■ Low On Resistance: 6.5Ω (Typical)
■ Low Power Consumption: 1A (Maximum)
– 10A Maximum ICCT Over an Expanded Control
Voltage Range: VIN = 2.6V, VCC = 4.3V
■ Wide -3dB Bandwidth: > 720MHz
■ 8kV I/O to GND ESD Protection
■ Power-off Protection When VCC = 0V, D+/ D- Pins Can
Tolerate up to 5.5V
■ Packaged in:
– 8-lead MicroPak (1.6 x 1.6mm)
– 8-lead US8
– 8-lead Ultrathin MLP (1.2 x 1.4mm)
Applications
■ Cell Phone, PDA, Digital Camera, and Notebook
■ LCD Monitor, TV, and Set-top Box
Related Resources
■ AN-6022 Using the FSUSB30/31 to Comply with
USB 2.0 Fault Condition Requirements
Description
The FSUSB31 is a low-power, single-port, high-speed
USB 2.0 switch. This part is configured as a double-pole,
single-throw switch and is optimized for switching or iso-
lating a high-speed (480Mbps) source or a high-speed
and full-speed (12Mbps) source. The FSUSB31 is com-
patible with the requirements of USB2.0 and features an
extremely low on capacitance (CON) of 3.7pF. The wide
bandwidth of this device (>720MHz) exceeds the band-
width needed to pass the third harmonic, resulting in sig-
nals with minimum edge and phase distortion. Superior
channel-to-channel crosstalk minimizes interference.
The FSUSB31 contains special circuitry on the D+ / D-
pins that allows the device to withstand an over-voltage
condition. This device is also designed to minimize cur-
rent consumption even when the control voltage applied
to the OE pin is lower than the supply voltage (VCC). This
feature is especially valuable for mobile applications,
such as cell phones, allowing direct interface with the
general-purpose I/Os of the baseband processor. Other
applications include port isolation and switching in porta-
ble cell phones, PDAs, digital cameras, printers, and
notebook computers.
Ordering Information
For Fairchild’s definition of “green” Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html.
Application Diagram
Figure 1. Typical Application Diagram
Part Number
Package
Eco Status
Package Description
FSUSB31K8X
MAB08A
Green
8-Lead US8, JEDEC MO-187, Variation CA 3.1mm Wide
FSUSB31L8X
MAC08A
RoHS
8-Lead MicroPak, 1.6mm Wide
FSUSB31UMX
UMLP08A
Green
8-Lead, Ultrathin Molded Leadless Package (UMLP), 1.2 x 1.4mm
Base Band
Processor
or FS USB
Controller
HS USB
Controller
VCC
USB
Connector
FSUSB31
D+
D–
OE
MicroPak
is a trademark of Fairchild Semiconductor Corporation.