- 您現在的位置：買賣IC網 > PDF目錄67506 > FNP850-12RG (POWER-ONE INC) 1-OUTPUT 856 W AC-DC PWR FACTOR CORR MODULE PDF資料下載
參數資料
| 型號： | FNP850-12RG |
| 廠商： | POWER-ONE INC |
| 元件分類： | 電源模塊 |
| 英文描述： | 1-OUTPUT 856 W AC-DC PWR FACTOR CORR MODULE |
| 封裝： | ROHS COMPLIANT |
| 文件頁數： | 8/13頁 |
| 文件大?。?/td> | 687K |
| 代理商： | FNP850-12RG |
105572 Rev. AA2
Page 4 of 13
www.power-one.com
FNP600/850/1000 AC-DC Front-Ends
& FNR-5-12G/FNR-5-48G Power Shelves Data Sheet
Control and Monitoring
Parameter
Conditions/Description
Min.
Nom.
Max.
Units
DC OK
TTL open-collector signal with active
20-mA pull-down. Represents percent
of output voltage where signal is OK.
Below this voltage, a signal high
condition indicates an output which is
out of tolerance. Green DC OK LED on
front panel indicates normal operation.
1
Internally pulled up to 5V with a 5.1 k
resistor. Note.
2
90
110
%
Input Power Fail Warning
TTL open-collector signal with active
20-mA pull-down. High indicates an
input power fail. Power Fail Warning
will turn OFF green AC OK LED.
Represents the time after warning
signal before Vout drops to 95% due to
loss of input power.
1 Internally pulled
up to 5V with a 5.1 k resistor. Note.
2
5
ms
Power Supply Present
Signal
Resistance of connection to logic
ground which allows user to determine
if power supply is present.
1
10
FNP600-12:
Main output only. Difference in current
between two supplies at >10% load
value.
5
FNP850-12:
7
FNP600-48:
2
Current Share
FNP1000-48:
2
A
Remote Sense
Total voltage compensation for cable
losses with respect to the main output.
0.5
V
Output Enable
Open circuit or logic high from ENA pin
to Vo1 RTN shuts OFF Vo1; Vaux and
fan are operational. Logic low (2 mA
sink capability) or jumper will turn ON
Vo1 within 100 ms. Open circuit
voltage on enable pin is 3.3 VDC.
Externally applied voltage to the enable
pin should NOT exceed 7 VDC. Signal
is referred to as Logic Return (LRTN).
1 Also available on I2C data line.
2
A pull-up to 3.3V can be achieved by terminating the logic signal with a 10 k resistor to logic ground.
I
2C Bus Management Interface
Static
Includes static information such as: part number and revision level, output rating, serial number, date code,
and manufacturing location.
Status
(Logic 1 or 0)
Power Supply OK.
AC Input OK.
DC Output OK.
Power Supply Seated.
Overtemperature.
Overcurrent.
Fan OK.
Real-Time Monitoring
Output voltage (main output) 0.1V LSD.
Output current (main output) 0.1A LSD.
Time in service.
Control Signals
Enable for main output.
Output voltage to: (0.01V resolution on 12V supplies;
0.05V resolution on all 48V supplies).
Fan speed level.
相關PDF資料 |
PDF描述 |
|---|---|
| FNP1000-48G | 1-OUTPUT 1006 W AC-DC PWR FACTOR CORR MODULE |
| FNP600-48 | 1-OUTPUT 600 W AC-DC PWR FACTOR CORR MODULE |
| FNP600-12G | 1-OUTPUT 600 W AC-DC PWR FACTOR CORR MODULE |
| FOX-HC735-250 | CRYSTAL OSCILLATOR, CLOCK, 250 MHz, HCMOS OUTPUT |
| FOX-HC736-250 | CRYSTAL OSCILLATOR, CLOCK, 250 MHz, HCMOS OUTPUT |
相關代理商/技術參數 |
參數描述 |
|---|---|
| FNP850-12RG REV AH | 制造商:Power-One 功能描述:- Bulk |
| FNP850-12S125 | 制造商:Power-One 功能描述: |
| FNP850-12S126G | 制造商:Power-One 功能描述: |
| FNP850-12S139G | 制造商:Power-One 功能描述: |
| FNP850-S139G | 制造商:Power-One 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。