- 您現在的位置：買賣IC網 > PDF目錄31838 > FMC-461/ES (CRANE ELECTRONICS INC) 1 FUNCTIONS, 28 V, 2.7 A, DATA LINE FILTER PDF資料下載
參數資料
| 型號： | FMC-461/ES |
| 廠商： | CRANE ELECTRONICS INC |
| 元件分類： | 數據傳輸濾波器 |
| 英文描述： | 1 FUNCTIONS, 28 V, 2.7 A, DATA LINE FILTER |
| 文件頁數： | 1/8頁 |
| 文件大?。?/td> | 124K |
| 代理商： | FMC-461/ES |
MODEL
B3-13
DESCRIPTION
The FMC-461 EMI filter has been specifically designed to reduce
the input line reflected ripple current of Interpoint’s MHF, MTR, MTO,
MHV, MHF+, MHD, MTW, MHE, and MLP series of DC/DC
converters. It is intended for use in applications which have high
frequency switch-mode DC/DC converters and which must meet
MIL-STD-461C levels of conducted and radiated noise.
The FMC filter is built using thick-film hybrid technology and is
hermetically sealed in metal packages for military, aerospace, and
other high-reliability applications. The filter uses only ceramic
capacitors for reliable high temperature operation.
MIL-STD NOISE MANAGEMENT
When used in conjunction with Interpoint converters, the FMC-461
filter reduces input ripple current by 40 dB within the frequency band
of 200 kHz to 50 MHz. This gives the filter/converter combination a
performance which exceeds the CEO3 test of MIL-STD-461C.
Typical FMC-461 filter frequency response and output impedance
behavior are shown in Figures 4 and 5. CEO3 performance of a
typical converter with the FMC-461 filter connected is shown in
Figure 3.
TRANSIENT SUPPRESSION
The FMC-461 filter also features a fast-reacting (1 pico second)
transient suppressor which begins clamping the input voltage at
approximately 47 VDC, protecting the DC/DC converter from
damage from induced line transients.
OPERATING TEMPERATURE
The filter is rated to operate with no degradation of performance
over the temperature range of -55°C to +125°C (as measured at the
baseplate). Above +125°C, current must be derated as specified on
the following page.
INSERTION LOSS
The maximum DC insertion loss for the FMC-461 filter (at a load of
22 watts) represents a power loss of less than 2% at typical input
voltage.
LAYOUT REQUIREMENT
The case pin, and ideally the case, should be tied to the case of the
converter through a low-inductance connection.
EMI INPUT FILTER
28 VOLT INPUT
FMC EMI FILTER
2.7 AMP
FEATURES
–55°C to +125°C operation
Up to 50 dB attenuation
400 kHz to 50 MHz
Transient suppression
Compliant to
MIL-STD-461C, CE03
Compatible with
MIL-STD-704E
DC power bus
Size (max): Non-flanged, case H1
2.125 x 1.125 x 0.400 (53.98 x 28.58 x 10.16 mm)
Flanged, case K2
2.910 x 1.125 x 0.400 inches (73.91 x 28.58 x 10.16 mm)
See Section B8, cases H1 and K2, for dimensions.
Weight:
48 grams maximum
Screening:
Standard, ES, or 883 (Class H). See Section C2 for
screening options, see Section A5 for ordering information.
FMC-461
FMC-461NT
2.7 Amp
相關PDF資料 |
PDF描述 |
|---|---|
| FMC-461F/ES | 1 FUNCTIONS, 28 V, 2.7 A, DATA LINE FILTER |
| FMC-461NT/ES | 1 FUNCTIONS, 28 V, 2.7 A, DATA LINE FILTER |
| FMC-461NTF/ES | 1 FUNCTIONS, 28 V, 2.7 A, DATA LINE FILTER |
| 94100-0120 | SIP20, IC SOCKET |
| 94100-0112 | SIP12, IC SOCKET |
相關代理商/技術參數 |
參數描述 |
|---|---|
| FMC-461F | 制造商:CRANE 制造商全稱:CRANE 功能描述:EMI INPUT FILTER 28 VOLT INPUT |
| FMC-461F/883 | 制造商:INTERPOINT 制造商全稱:INTERPOINT 功能描述:EMI INPUT FILTER 28 VOLT INPUT |
| FMC-461F/ES | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:EMI Filter |
| FMC-461NT | 制造商:CRANE 制造商全稱:CRANE 功能描述:EMI INPUT FILTER 28 VOLT INPUT |
| FMC-461NT/883 | 制造商:CRANE 制造商全稱:CRANE 功能描述:EMI INPUT FILTER 28 VOLT INPUT |
發布緊急采購，3分鐘左右您將得到回復。