7
I
Product Specifications
Rating
Current rating: 0.4A DC
Operating Temperature Range:_40 to +70 (Note 1)
Storage Temperature Range:_10 to +50 (Note 2)
Voltage rating: 50V AC
Operating Humidity Range:Relative humidity, 90% max.
Storage Humidity Range:Relative humidity, 90% max.
(Not dewed)
(Not dewed)
Applicable FPC
t=0.3±0.05
Tin-lead
plating(Note 3)
t=0.18 ± 0.05 for FH12F-*S-0.5SH
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers nonconducting condition of installed connectors in storage, shipment or during transportation.
Note 3: When FPC is gold plated, the connector contacts should be also gold plated: Select the (05) specification.
I
Material
Part
Material
Polyamide
PPS
Phosphor bronze
Brass
Finish
Remarks
Insulator
Color : Beige
Color : Dark brown
Tin-lead
plating
Tin-lead
plating
UL94V-0
Contact
Macal Fittings
–––––––
I
Ordering Information
FH12 A - 10 (4) - S A - 0.5 SH (05)
q
e
r
w
y
t
u
i
o
q
Series Name
w
Blank : standard type
A : Top contact type
S : Type with strengthed flip-lock actuator
F : Type with 0.18mm FPC End Thickness
e
Standard type
: Number of contacts
Eccentric type
:
Number of contacts in 0.5mm housing
r
Standard type
: Blank
Eccentric type
: Number of contacts
: FH12
t
Contact alignment: Single
y
Eccentric direction:
Blank : standard type
A : Eccentric type
: 0.5mm, 1mm
u
Contacts Pitch
i
Contact type
SH
:
SMT horizontal mounting type
SV
:
SMT vertical mounting type
Plating specification
Blank :
Tin-lead
plating
(05) : Gold plating
o
1. Insulation resistance
2. Withstanding voltage
3. Contact resistance
4.
Durability (Insertion/withdrawal)
Contact resistance: 50m ohms maximum
No damage, cracks, or parts dislocation.
No electrical discontinuity of 1μs or more
5. Vibration
Contact resistance: 50m ohms maximum.
No damage, cracks, or parts dislocation.
500M ohms minimum
No flashover or insulation breakdown.
50m ohms maximum
100V DC
150V AC/1 minute
1mA
20 cycles
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,
2 hours in each of the 3 directions.
No electrical discontinuity of 1μs or more
Contact resistance: 50m ohms maximum.
No damage, cracks, or parts dislocation.
Acceleration of 490 m/s
2
, 11 ms duration,
sine half-wave waveform, 3 cycles in each of the 3 axis.
6. Shock
Contact resistance: 50m ohms maximum.
7.
Humidity(Steady state)
Insulation resistance: 50M ohms minimum.
No damage, cracks, or parts dislocation.
96 hours at temperature of 40 and humidity of 90% to 95%
Contact resistance: 50m ohms maximum.
Insulation resistance: 50M ohms minimum.
No damage, cracks, or parts dislocation.
No deformation of
components affecting performance.
5 cycles under conditions as follows;
Temperature: -40
/
15 to 35
/
85
/
15 to 35
,
Time: 30
/
5 max.
/
30
/
5 max.(minutes)
Reflow: At the recommended temperature profile
Manual soldering: 350±5 for 3 seconds
8. Temperature Cycle
9.
Resistance
to
Soldering heat
Item
Specification
Conditions