- 您現在的位置：買賣IC網 > PDF目錄260196 > FEDF20MT07-12P (SOURIAU INC) 7 CONTACT(S), NICKEL ALUMINUM BRONZE, FEMALE, CIRCULAR CONNECTOR, PLUG PDF資料下載
參數資料
| 型號： | FEDF20MT07-12P |
| 廠商： | SOURIAU INC |
| 元件分類： | 圓形連接器 |
| 英文描述： | 7 CONTACT(S), NICKEL ALUMINUM BRONZE, FEMALE, CIRCULAR CONNECTOR, PLUG |
| 文件頁數： | 6/10頁 |
| 文件大小： | 300K |
| 代理商： | FEDF20MT07-12P |
245
M Series
The M Series offer two versions :
Single watertightness for cables with single jacket
Double watertightness for cables with inner and outer sheaths
The M Series Single watertightness connectors are available in 5
standard sizes, 9M, 10M, 14M, 20M and 24M. 100 % watertightness
is achieved by both o’rings and packing washers inside the metal
housings. The packing washers offer waterproofing independently of
the cable clamps so that a brutal traction on the cable cannot reduce
the watertightness.
Since the watertightness is not achieved through overmolding or heat
vulcanization the assembling of connectors can be made outside
workshop on the spot when necessary.
The main parts achieving watertightness can be seen on fig. 1.
- O’rings (1) are located on receptacles (2), plugs (3) and pin and
socket inserts (4) and (5).
- The packing washer (6) is compressed by metal washers (7) through
screwing of the rear tightening metal sleeve (8).
- The neoprene boot is intended to limit the cable radius curvature.
Double Watertightness on inner and outer sheaths
FDED straight plug
PCDE cable connecting plug
The M Series double watertightness connectors are available in
3 sizes 14M, 20M and 24M. The watertightness is ensured at two
levels :
- on the outer jacket
- on the inner sheath.
Mechanical cable strength is provided by :
- a mechanical capture of the braid armor
- a clamping thanks to a metal clamping sleeve on sheath in the event
there is no amour.
Note : The two versions are compatible with in the following standard
M series shells :
RER receptacle with round flange, front fitting and rear axial
nut
REC receptacle with square flange, front fitting with 4 screws
TER bulkhead with round flange, front fitting and rear axial
nut
TEC bulkhead with square flange
Options :
With steel armor / CU braid
Without steel armor / CU braid
Options : With steel armor / CU braid
Without steel armor / CU braid
connector
cable
Watertightness on inner sheath
{ x z
} ~
x |
y
x { z
~ }
~
braid crimping
jacket
Watertightness
on panel
Watertightness at the interface
plug/receptacle
Watertightness on cable
braid
inner sheath
Watertightness on jacket
Single Watertightness on outer sheath :
The main parts achieving watertightness at the level of the plug can
be seen on fig. 2.
- On the outer jacket, packing washer (6) are compressed by metal
tightening sleeve (8).
- On the inner sheath, compound injection inside a compounding
housing (10) ensures a second watertightness level (watertightness
relay).
- The neoprene boot (9) has the same roles as preceding version.
相關PDF資料 |
PDF描述 |
|---|---|
| FEDF20MT07-12S | 7 CONTACT(S), NICKEL ALUMINUM BRONZE, FEMALE, CIRCULAR CONNECTOR, PLUG |
| FEDF20MT16-12P | 16 CONTACT(S), NICKEL ALUMINUM BRONZE, FEMALE, CIRCULAR CONNECTOR, PLUG |
| FEDF20MT16-12S | 16 CONTACT(S), NICKEL ALUMINUM BRONZE, FEMALE, CIRCULAR CONNECTOR, PLUG |
| FEDF20MT21-14P | 21 CONTACT(S), NICKEL ALUMINUM BRONZE, FEMALE, CIRCULAR CONNECTOR, PLUG |
| FFC-54T18BMEP | 54 CONTACT(S), MALE, STRAIGHT TWO PART BOARD CONNECTOR, SOLDER |
相關代理商/技術參數 |
參數描述 |
|---|---|
| F-EDFA | 制造商:THOR 制造商全稱:THOR 功能描述:Typical F-EDFA Application |
| FEDK07P6901 | 制造商:Baumer Electric Ag 功能描述: |
| FEDK10N3101 | 制造商:Baumer Electric Ag 功能描述: |
| FEDK10P3101 | 制造商:Baumer Electric Ag 功能描述: |
| FEDK14P5101/S35A | 制造商:Baumer Electric Ag 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。