參數資料
型號： EPL43102
英文描述： Graphic STN LCD Drivers with Built-in RAM
中文描述： 圖形STN液晶顯示器驅動器，內置內存
文件頁數： 28/64頁
文件大?。?/td> 280K
代理商： EPL43102
43 COM / 102 SEG LCD DRIVER
The information in this document is subject to change without notice.
29
/DOF pin description
The pin is used to control blinking LCD display.
M/S= “H”
M/S=”L”
Instruction
/DOF (Output) /DOF (Input) =”H” /DOF (Input) =”L”
Display “ON”
“H”
LCD On
LCD Off
Display “OFF”
“L”
LCD Off
When the “Power Save” Instruction is activating, the /DOF pin is set to low level.
Display timing generator circuit
This circuit generates some signals to be used to display LCD. When using in
master/slave mode (multi-chip), some pins must be connected each other. That’s due to
synchronization output. The display clock (CL) generated by the oscillation clock,
generates a clock to the line counter and a latch signal to the display data latch. The line
address of the on-chip RAM is generated in synchronization with the display clock (CL),
and the 102-bit display data is latched by the display data latch circuit in synchronization
with the display clock. The display data which is read to the LCD driver is completely
independent of the access to the display data RAM from the microprocessor.
The display clock generates an LCD frame reversal signal (FR) which enables the LCD
driver to make an AC drive waveform, and also generates an internal common timing
signal and start signal to the common driver.. When this EPL43102 is used for a
multi-chip, the slave chip must receive the FR, CL, /DOF signals from the master.
Operation Mode
FR
CL
/DOF
FRS
OSC
Internal oscillator is enable(CLS=”H”) Output Output Output Output Open
Master
(M/S=”H”)
Internal oscillator is disable (CLS=”L”) Output Output Output Output Input
Input
Hi-Z
Open
Slave (M/S=”L”)
Internal oscillator is disable
(CLS =”L” or “H”)
Input
Hi-Z
Open
Note: Open means “l(fā)eave the pin open”
Oscillator frequency
The EPL43102 contains a RC oscillator. The frame frequency (fFM) is derived from the
RC circuit’s oscillation frequency (fOSC) by driving it an appropriate value. The
relationship between the oscillation frequency (fOSC), display clock frequency (fCL) and
the frame frequency (fFM) is shown below.
相關PDF資料
PDF描述
EPL65132 Graphic STN LCD Drivers with Built-in RAM
EPM3032ALC44-10 Electrically-Erasable Complex PLD
EPM3032ALC44-4 Eval Board for ISL6118 2.5V to 5V Dual Power Supply Controller with 0.6A Integrated Current Regulation and Timed Delay to Latch-off
EPM3032ALC44-7 Electrically-Erasable Complex PLD
EPM3032ATC44-10
相關代理商/技術參數
參數描述
EPL-60 功能描述:PAPER THERMAL PRINTER 60 MM RoHS:否 類別:計算機，辦公室 - 元件，配件 >> 配件 系列:- 標準包裝:1 系列:- 附件類型:替代墨盒 技術規格:- 適用于相關產品:- 其它名稱:CMS-INK-RO-C5
EPL6024-102 制造商:Coilcraft Inc 功能描述:Power inductor, shielded, 20% tol, SMT, RoHS, halogen-free
EPL6024-102ME 制造商:Coilcraft Inc 功能描述:Power inductor, shielded, 20% tol, SMT, RoHS, halogen-free
EPL6024-102MEB 功能描述:固定電感器 Power Inductor 1 uH 20 % 12.5 A RoHS:否 制造商:AVX 電感:10 uH 容差:20 % 最大直流電流:1 A 最大直流電阻:0.075 Ohms 工作溫度范圍:- 40 C to + 85 C 自諧振頻率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接類型:SMD/SMT 封裝 / 箱體:6.6 mm x 4.45 mm
EPL6024-102MEC 功能描述:固定電感器 Power Inductor 1 uH 20 % 12.5 A RoHS:否 制造商:AVX 電感:10 uH 容差:20 % 最大直流電流:1 A 最大直流電阻:0.075 Ohms 工作溫度范圍:- 40 C to + 85 C 自諧振頻率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接類型:SMD/SMT 封裝 / 箱體:6.6 mm x 4.45 mm
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*