參數資料
型號: EM91210
廠商: ELAN Microelctronics Corp .
英文描述: Tone/Pulse Switchable Dialer with LCD Interface(帶LCD接口,低工作電流的音調/脈沖可轉換的撥號器)
中文描述: 音頻/脈沖切換撥號器與LCD接口(帶液晶顯示接口,低工作電流的音調/脈沖可轉換的撥號器)
文件頁數: 5/19頁
文件大?。?/td> 135K
代理商: EM91210
EM91210 SERIES
TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE
5
* This specification are subject to be changed without notice.
10.1.1997
Storing
: EM91210 series support two operating methods to store numbers into SAVE redial memory.
Method 1
To select Pulse or Tone mode.
Off-hook (or turn on HF function), push
d1,
d2,
.. ,
dn.
The numbers d1, d2, .. , dn will be dialed out in Pulse
or Tone mode as selection.
After dn had been dialed out and push
[ST],
Save key. If the keying numbers are more than 32 digits that
content of SAVE memory can not be updated. Otherwise, these numbers will be stored into SAVE memory.
In the [] key allows to be omitted.
Method 2
Off-hook (or turn on HF function), push
ST,
d1,
d2,
.. , dn,
[ST],
Save
. If the keying numbers are not over 32
digits, the numbers d1, d2, .. , dn will be stored in SAVE redial memory automatically.
Dialing :
To select Pulse or Tone mode.
Off-hook (or turn on HF function), push Save key. The numbers stored in SAVE memory will be dialed out
in Pulse or Tone mode as selection.
Repertory memory
The EM91210 series incorporated several sets repertory memory and each one can store number up to 16 digits.
In memory storing, if stored numbers are more than 16 digits that only the previous 16 digits can be stored into
specific memory. Otherwise, these numbers can be stored entirely. After memory dialed out, the content of
LNB is keeping to current data.
Storing of 10 sets memory types
Indirect (two-touch) operation
Off-hook (or turn on HF function), push
ST, d1, d2, .. , dn, ST, n.
The numbers d1, d2, .. , dn will be stored
into memory location “n”. The “n” expressed digital key from 0 to 9.
Dialing
(after memory dialed out, the content of LNB is keeping to current data)
Indirect (two-touch) of 10 sets memory
To select Pulse or Tone mode.
Off-hook (or Turn on HF function), push
A, n
key. The numbers that are stored in indirect memory location
“n” will be dialed out in Pulse or Tone mode as selection. The “n” expressed digital key from 0 to 9.
Pause (P) key operation
The Pause (P) key is designed to support pause operation in dialing duration. “P” key can be stored in memory
and it will occupy one digital position.
相關PDF資料
PDF描述
EM91215A TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE
EM91215AP TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE
EM91215B TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE
EM91215BP TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE
EM91215C TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE
相關代理商/技術參數
參數描述
EM91210A 制造商:EMC 制造商全稱:ELAN Microelectronics Corp 功能描述:TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE
EM91210A/B/C 制造商:EMC 制造商全稱:ELAN Microelectronics Corp 功能描述:Telephone Dialer Multi-Function Dialer
EM91210AP 制造商:EMC 制造商全稱:ELAN Microelectronics Corp 功能描述:TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE
EM91210B 制造商:EMC 制造商全稱:ELAN Microelectronics Corp 功能描述:TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE
EM91210BP 制造商:EMC 制造商全稱:ELAN Microelectronics Corp 功能描述:TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE