參數資料
型號: EM91203BP
廠商: ELAN Microelctronics Corp .
英文描述: TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE
中文描述: 音頻/脈沖開關的撥號器與LCD接口
文件頁數: 5/19頁
文件大?。?/td> 143K
代理商: EM91203BP
EM91203 SERIES
TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE
5
* This specification are subject to be changed without notice.
10.1.1997
Storing
: EM91203 series support two operating methods to store numbers into SAVE redial memory.
Method 1
To select Pulse or Tone mode.
Off-hook (or turn on HF function), push
d1,
d2,
.. ,
dn.
The numbers d1, d2, .. , dn will be dialed out in Pulse
or Tone mode as selection.
After dn had been dialed out and push
[ST],
Save key. If the keying numbers are more than 32 digits that
content of SAVE memory can not be updated. Otherwise, these numbers will be stored into SAVE memory.
In the [] key allows to be omitted.
Method 2
Off-hook (or turn on HF function), push
ST,
d1,
d2,
.. , dn,
[ST],
Save
. If the keying numbers are not over 32
digits, the numbers d1, d2, .. , dn will be stored in SAVE redial memory automatically.
Dialing :
To select Pulse or Tone mode.
Off-hook (or turn on HF function), push Save key. The numbers stored in SAVE memory will be dialed out
in Pulse or Tone mode as selection.
Repertory memory
The EM91203 series incorporated several sets repertory memory and each one can store number up to 16 digits.
As in memory storing, if stored numbers are more than 16 digits that only the previous 16 digits can be stored
into specific memory. Otherwise, these numbers can be stored entirely. After memory dialed out, the content
of LNB is keeping to current data.
Storing of 3 sets memory
Direct (one-touch) operation
Off-hook (or turn on HF function), push
ST, d1, d2, .. , dn [ST], EMn.
The numbers d1, d2, .. , dn will be stored
into memory location “EMn”. The “EMn” expressed emergency memory EM1 to EM3.
Dialing
(after memory dialed out, the content of LNB is keeping to current data)
Direct (one-touch) memory operation
To select Pulse or Tone mode.
Off-hook (or Turn on HF function), push
EMn
key. The numbers that are stored in direct memory location
EMn will be dialed out in Pulse or Tone mode as selection. The “n” expressed digital number from 1~3 decided
by dialers’ memory sets.
Pause (P) key operation
The Pause (P) key is designed to support pause operation in dialing duration. “P” key can be stored in memory
and it will occupy one digital position.
相關PDF資料
PDF描述
EM91203C TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE
EM91203CK TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE
EM91210A TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE
EM91210AP TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE
EM91210B TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE
相關代理商/技術參數
參數描述
EM91203C 制造商:EMC 制造商全稱:ELAN Microelectronics Corp 功能描述:TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE
EM91203CK 制造商:EMC 制造商全稱:ELAN Microelectronics Corp 功能描述:TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE
EM91210 制造商:EMC 制造商全稱:ELAN Microelectronics Corp 功能描述:TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE
EM91210A 制造商:EMC 制造商全稱:ELAN Microelectronics Corp 功能描述:TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE
EM91210A/B/C 制造商:EMC 制造商全稱:ELAN Microelectronics Corp 功能描述:Telephone Dialer Multi-Function Dialer