
1
* This specification are subject to be changed without notice.
EM73675
8.1.1998
Preliminary
GENERAL DESCRIPTION
EM73675 is a highly-integrated digital answering machine controller in which control function and signal
amplification capability are integrated into a monolithic device. The EMC EM73400 based 4-bit controller
contains 6K-byte ROM, 244-nibble RAM, 5 interrupt sources, a melody generator, two 12-bit timer/counters,
a time-based interrupt and 14 general purpose I/O pins to provide interfaces with keyboard, LED display, DAA
circuit, tape mechanism and DTMF detection circuit etc. Total component counts and production cost can
therefore be reduced.
The linear amplifier portion combines all necessary amplifiers with Automatic Level Control function for
signal amplification and conditioning, analog switches and digital attenuator, designed to provide the most
integrated design for the Single Deck Tape-Based Telephone Answering Device applications.
FEATURES
4-bit controller of EM73675 is based on EMC EM73400 family which provides:
Operating voltage
: 4.5 to 5.5 V. (System clock frequency : 3.58 MHz).
Clock source
: Single clock system available for resonator or crystal and external clock source by
mask option.
Instruction set
: 108 powerful instructions with cycle time of less than 2.2
μ
s (fosc=3.58MHz)
ROM capacity
: 6K x 8 bits.
RAM capacity
: 244 x 4 bits.
Input port
: 2 port (3 bits)
Port 12
: Schmitt trigger. (SCH1, SCH2)
Port 14/ (Wakeup)
: Pull up resistor and sleep/hold releasing function are available by mask option.
I/O port
: 5 ports (19 bits)
Port 1, 2
: R-option, push-pull or NMOS open drain, high current output for driving LED.
Port 7
: push-pull or open drain available by mask option.
Port 8,9
: Initial high/low, push-pull or open drain available by mask option.
12-bit Timer/Counters : Two 12-bit Timer/Counters are programmable for timer, event counter, or pulse
width measurement mode.
Built-in Time Base
: 8 kinds of frequencies.
Subroutine nesting
: Up to 13 levels.
Interrupt
: External ...
2 Input interrupt sources.
Internal ....
2 Timer overflow interrupts. 1 Time base interrupt.
Power saving function : Sleep function, CPU hold internal state and stop oscillating.
Hold function, CPU hold internal state and oscillator still working.
Data Pointer (DP)
: Data conversion or table look-up.
Built-in melody
: Programmable melody generator.
Built-in Amplifiers for Telephone Answering Device Application.
SCF based with full DTMF detection for remote control.
Pre-Amplifier for Tape Head, Microphone, Telephone Line signal Amplification
Automatic Level Control to accommodate wide range of signal amplitude
Differential output type power amplifier drive speaker directly.
LineO amplifier, Speaker amplifier buffer and Mute function.
Sixteen stage digital attenuator for implementing Digital Volume Control with no extra cost.
Complete set of analog switches configurable for all operation modes required by TAD applications.
Package : SDIP 42.
4-BIT MICRO-CONTROLLER FOR TELECOM PRODUCT