- 您現在的位置：買賣IC網 > PDF目錄362674 > EM4350A6WP6 (EM Microelectronic) 1 KBit READ / WRITE CONTACTLESS IDENTIFICATION DEVICE PDF資料下載
參數資料
| 型號： | EM4350A6WP6 |
| 廠商： | EM Microelectronic |
| 英文描述： | 1 KBit READ / WRITE CONTACTLESS IDENTIFICATION DEVICE |
| 中文描述： | 1千位讀/寫非接觸式識別裝置 |
| 文件頁數： | 6/14頁 |
| 文件大?。?/td> | 386K |
| 代理商： | EM4350A6WP6 |
R
EM4150
EM4350
Copyright
2004, EM Microelectronic-Marin SA
Selective Read Mode cont.
The Selective Read mode command is followed by a single 32-bit word containing the new first and last addresses. Bits 0
to 7 correspond to the First Word Read and bits 8 to 15 correspond to the Last Word Read. Bits 16 to 31 have to be sent
but are not used in the chip. The parities must be sent according to the word organisation as described in fig.7. Note that
bit 31 is transmitted first.
To read the device Identification or the Serial Number, the Selective Read Command allows direct access to the Laser
programmed words. These words can also be addressed in the standard read mode by selecting the addresses
accordingly.
OUTPUT
WORD n
LIW
INPUT
RM
Selective RD
ADDRESSES
LIW
FWR
LIW
ACK/NAK
LIW
t
pp
Fig. 11
LW7 LW6 LW5 LW4 LW3 LW2 LW1 LW0 P1 FW7 FW6 FW5 FW4 FW3 FW2 FW1 FW0 P0 PC7 PC6 PC5 PC4 PC3 PC2 PC1 PC0 "0"
Addresses Bit Stream Format
First bit received
XX XX XX XX XX XX XX XX P3 XX XX XX XX XX XX XX XX P2
Fig. 12
Reset Command
The Reset Command will return from any mode to the Standard Read Mode. The next word out is the FWR.
OUTPUT
WORD n
LIW
INPUT
RM
RESET
LIW
FWR
LIW
LIW
ACK/NAK
t
pp
t
init
Fig. 13
Login
The Login command is used to access protected memory areas. This command has to be used only once to perform
several password protected commands. The Power-On sequence and the Reset command will reset the password entry,
and a new Login command has to be received to perform further password protected operations.
Upon reception of a correct password, the EM4150 will respond with an acknowledge pattern (ACK) and then continue in
Standard Read Mode. If the Login is correct then password protected operations are allowed. If the password is incorrect, a
NAK pattern is issued and password protected operations will not be possible (refer to Write Word for password data
structure).
OUTPUT
WORD n
LIW
INPUT
RM
LOGIN
PASSWORD
LIW
FWR
LIW
LIW
ACK/NAK
t
pp
Fig. 14
If bit 16 of the control word is disabled (Password Check ON/OFF), the Login is still mandatory to modify the Protection
Word, the Control Word, and the Password, but not to write in the EEPROM which is not write inhibited. In order to modify a
write inhibited word, the Protection word has to be modified first. The Read protected area always requires the Login to be
read. If the Write Protection Word is write protected, the write protection configuration is locked.
6
www.emmicroelectronic.com
相關PDF資料 |
PDF描述 |
|---|---|
| EM4350A6WP6E | 1 KBit READ / WRITE CONTACTLESS IDENTIFICATION DEVICE |
| EM4350A6WP7 | 1 KBit READ / WRITE CONTACTLESS IDENTIFICATION DEVICE |
| EM4350A6WP7E | 1 KBit READ / WRITE CONTACTLESS IDENTIFICATION DEVICE |
| EM4350A6WS11 | 1 KBit READ / WRITE CONTACTLESS IDENTIFICATION DEVICE |
| EM4350A6WS11E | 1 KBit READ / WRITE CONTACTLESS IDENTIFICATION DEVICE |
相關代理商/技術參數 |
參數描述 |
|---|---|
| EM4350A6WP6E | 制造商:EMMICRO 制造商全稱:EM Microelectronic - MARIN SA 功能描述:1 KBit READ / WRITE CONTACTLESS IDENTIFICATION DEVICE |
| EM4350A6WP7 | 制造商:EMMICRO 制造商全稱:EM Microelectronic - MARIN SA 功能描述:1 KBit READ / WRITE CONTACTLESS IDENTIFICATION DEVICE |
| EM4350A6WP7E | 制造商:EMMICRO 制造商全稱:EM Microelectronic - MARIN SA 功能描述:1 KBit READ / WRITE CONTACTLESS IDENTIFICATION DEVICE |
| EM4350A6WS11 | 制造商:EMMICRO 制造商全稱:EM Microelectronic - MARIN SA 功能描述:1 KBit READ / WRITE CONTACTLESS IDENTIFICATION DEVICE |
| EM4350A6WS11E | 制造商:EMMICRO 制造商全稱:EM Microelectronic - MARIN SA 功能描述:1 KBit READ / WRITE CONTACTLESS IDENTIFICATION DEVICE |
發布緊急采購，3分鐘左右您將得到回復。