
1
FN7287.1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143
Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Elantec Semiconductor, Inc. 1996, Intersil Americas Inc. 2004. All Rights Reserved. Elantec is a registered trademark of Elantec Semiconductor, Inc.
All other trademarks mentioned are the property of their respective owners.
EL7412
High Speed, Four Channel Power
MOSFET Drivers
The EL7412 contains (4) high performance matched drivers.
These very high speed drivers are capable of delivering
peak currents of 2.0 amps into highly capacitive loads and
are ideally suited for “Full bridge' and ultrasound
applications. The high speed performance is achieved by
means of a proprietary “Turbo-Driver' circuit that speeds up
input stages by tapping the wider voltage swing at the
output. Improved speed and drive capability are enhanced
by matched rise and fall delay times. The matched delays
maintain the integrity of input-to-output pulse-widths to
reduce timing errors and clock skew problems. This
improved performance is accompanied by a 10 fold
reduction in supply currents over bipolar drivers, yet without
the delay time problems commonly associated with CMOS
devices. Dynamic switching losses are minimized with non-
overlapped drive techniques.
Pinout
Features
Excellent response times
Matched rise and fall times
Reduced clock skew
Low output impedance
Low input capacitance
High noise immunity
Improved clocking rate
Low supply current
Wide operating voltage range
Pb-free available
Applications
Full bridge drivers
Clock/line drivers
CCD Drivers
Ultra-sound transducer drivers
Power MOSFET drivers
Switch mode power supplies
Class D switching amplifiers
Ultrasonic and RF generators
Pulsed circuits
EL7412
[20-PIN SO (0.300”)]
TOP VIEW
Note 1: Pins 4–7 and 14–17 are electrically connected.
Manufactured under U.S. Patent Nos. 5,334,883, #5,331,047
Ordering Information
PART NUMBER
PACKAGE
TAPE &
REEL
PKG. DWG.
#
EL7412CM
20-Pin SO (0.300”)
-
MDP0027
EL7412CM-T13
20-Pin SO (0.300”)
13”
MDP0027
EL7412CMZ
(See Note)
20-Pin SO (0.300”)
(Pb-free)
-
MDP0027
EL7412CMZ-
T13 (See Note)
20-Pin SO (0.300”)
(Pb-free)
13”
MDP0027
NOTE: Intersil Pb-free products employ special Pb-free material
sets; molding compounds/die attach materials and 100% matte tin
plate termination finish, which is compatible with both SnPb and
Pb-free soldering operations. Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed
the Pb-free requirements of IPC/JEDEC J-Std-020C.
Data Sheet
August 26, 2004, Rev B