<code id="yf0fa"></code>
  • <dl id="yf0fa"><s id="yf0fa"><li id="yf0fa"></li></s></dl>
    <i id="yf0fa"><optgroup id="yf0fa"><samp id="yf0fa"></samp></optgroup></i>
    參數資料
    型號: EL5210CS-T13
    廠商: Intersil
    文件頁數: 3/16頁
    文件大?。?/td> 0K
    描述: IC AMP DUAL R-R I/O 30MHZ 8-SOIC
    標準包裝: 2,500
    放大器類型: 電壓反饋
    電路數: 2
    輸出類型: 滿擺幅
    轉換速率: 33 V/µs
    增益帶寬積: 20MHz
    -3db帶寬: 30MHz
    電流 - 輸入偏壓: 2nA
    電壓 - 輸入偏移: 3000µV
    電流 - 電源: 2.5mA
    電流 - 輸出 / 通道: 30mA
    電壓 - 電源,單路/雙路(±): 4.5 V ~ 16.5 V,±2.25 V ~ 8.25 V
    工作溫度: -40°C ~ 85°C
    安裝類型: 表面貼裝
    封裝/外殼: 8-SOIC(0.154",3.90mm 寬)
    供應商設備封裝: 8-SOIC
    包裝: 帶卷 (TR)
    11
    FN7185.3
    July 5, 2007
    Applications Information
    Product Description
    The EL5210 and EL5410 voltage feedback amplifiers are
    fabricated using a high voltage CMOS process. They exhibit
    Rail-to-Rail input and output capability, are unity gain stable
    and have low power consumption (2.5mA per amplifier).
    These features make the EL5210 and EL5410 ideal for a
    wide range of general-purpose applications. Connected in
    voltage follower mode and driving a load of 1k
    Ω and 12pF,
    the EL5210 and EL5410 have a -3dB bandwidth of 30MHz
    while maintaining a 33V/S slew rate. The EL5210 is a dual
    amplifier while the EL5410 is a quad amplifier.
    Operating Voltage, Input, and Output
    The EL5210 and EL5410 are specified with a single nominal
    supply voltage from 5V to 15V or a split supply with its total
    range from 5V to 15V. Correct operation is guaranteed for a
    supply range of 4.5V to 16.5V. Most EL5210 and EL5410
    specifications are stable over both the full supply range and
    operating temperatures of -40°C to +85°C. Parameter
    variations with operating voltage and/or temperature are
    shown in the typical performance curves.
    The input common-mode voltage range of the EL5210 and
    EL5410 extends 500mV beyond the supply rails. The output
    swings of the EL5210 and EL5410 typically extend to within
    100mV of positive and negative supply rails with load
    currents of 5mA. Decreasing load currents will extend the
    output voltage range even closer to the supply rails. Figure 1
    shows the input and output waveforms for the device in the
    unity-gain configuration. Operation is from ±5V supply with a
    1k
    Ω load connected to GND. The input is a 10V
    P-P sinusoid.
    The output voltage is approximately 9.8VP-P.
    FIGURE 1. OPERATION WITH RAIL-TO-RAIL INPUT AND
    OUTPUT
    Short Circuit Current Limit
    The EL5210 and EL5410 will limit the short circuit current to
    ±120mA if the output is directly shorted to the positive or the
    negative supply. If an output is shorted indefinitely, the power
    dissipation could easily increase such that the device may
    be damaged. Maximum reliability is maintained if the output
    continuous current never exceeds ±30mA. This limit is set by
    the design of the internal metal interconnects.
    Output Phase Reversal
    The EL5210 and EL5410 are immune to phase reversal as
    long as the input voltage is limited from VS- -0.5V to VS+
    +0.5V. Figure 2 shows a photo of the output of the device
    with the input voltage driven beyond the supply rails.
    Although the device's output will not change phase, the
    input's overvoltage should be avoided. If an input voltage
    exceeds supply voltage by more than 0.6V, electrostatic
    protection diodes placed in the input stage of the device
    begin to conduct and overvoltage damage could occur.
    FIGURE 2. OPERATION WITH BEYOND-THE-RAILS INPUT
    Power Dissipation
    With the high-output drive capability of the EL5210 and
    EL5410 amplifiers, it is possible to exceed the 125°C
    'absolute-maximum junction temperature' under certain load
    current conditions. Therefore, it is important to calculate the
    maximum junction temperature for the application to
    determine if load conditions need to be modified for the
    amplifier to remain in the safe operating area.
    The maximum power dissipation allowed in a package is
    determined according to:
    Where:
    TJMAX = Maximum Junction Temperature
    TAMAX= Maximum Ambient Temperature
    ΘJA = Thermal Resistance of the Package
    PDMAX = Maximum Power Dissipation in the Package.
    The maximum power dissipation actually produced by an IC
    is the total quiescent supply current times the total power
    supply voltage, plus the power in the IC due to the loads, or:
    VS=±5V
    TA=25°C
    AV=1
    VIN=10VP-P
    Output
    Input
    5V
    10s
    VS=±2.5V
    TA=25°C
    AV=1
    VIN=6VP-P
    1V
    10s
    P
    DMAX
    T
    JMAX
    T
    AMAX
    Θ
    JA
    ---------------------------------------------
    =
    P
    DMAX
    ΣiV
    [
    S
    I
    SMAX
    V
    (
    S+VOUTi )
    I
    LOADi
    ×
    +
    ×]
    =
    EL5210, EL5410
    相關PDF資料
    PDF描述
    LT1806CS6#TR IC OPAMP R-R IN/OUT SGL SOT23-6
    T12-211R-2 CIRCUIT BRKR THERMAL 2A 1POLE
    NPTC171KFXC-RC CONN FEMALE 17POS .1" SMD TIN
    T12-211-20 CIRCUIT BRKR THERMAL 20A 1POLE
    T12-211R-5.5 CIRCUIT BRKR THERMAL 5.5A 1POLE
    相關代理商/技術參數
    參數描述
    EL5210CS-T7 功能描述:IC AMP DUAL R-R I/O 30MHZ 8-SOIC RoHS:否 類別:集成電路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 標準包裝:50 系列:- 放大器類型:通用 電路數:2 輸出類型:滿擺幅 轉換速率:1.8 V/µs 增益帶寬積:6.5MHz -3db帶寬:4.5MHz 電流 - 輸入偏壓:5nA 電壓 - 輸入偏移:100µV 電流 - 電源:65µA 電流 - 輸出 / 通道:35mA 電壓 - 電源,單路/雙路(±):1.8 V ~ 5.25 V,±0.9 V ~ 2.625 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:10-TFSOP,10-MSOP(0.118",3.00mm 寬) 供應商設備封裝:10-MSOP 包裝:管件
    EL5210CSZ 功能描述:IC OPAMP DUAL R-R I/O 8-SOIC RoHS:是 類別:集成電路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 標準包裝:50 系列:- 放大器類型:通用 電路數:2 輸出類型:滿擺幅 轉換速率:1.8 V/µs 增益帶寬積:6.5MHz -3db帶寬:4.5MHz 電流 - 輸入偏壓:5nA 電壓 - 輸入偏移:100µV 電流 - 電源:65µA 電流 - 輸出 / 通道:35mA 電壓 - 電源,單路/雙路(±):1.8 V ~ 5.25 V,±0.9 V ~ 2.625 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:10-TFSOP,10-MSOP(0.118",3.00mm 寬) 供應商設備封裝:10-MSOP 包裝:管件
    EL5210CSZ-T13 功能描述:IC AMP DUAL R-R I/O 30MHZ 8-SOIC RoHS:是 類別:集成電路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 標準包裝:50 系列:- 放大器類型:通用 電路數:2 輸出類型:滿擺幅 轉換速率:1.8 V/µs 增益帶寬積:6.5MHz -3db帶寬:4.5MHz 電流 - 輸入偏壓:5nA 電壓 - 輸入偏移:100µV 電流 - 電源:65µA 電流 - 輸出 / 通道:35mA 電壓 - 電源,單路/雙路(±):1.8 V ~ 5.25 V,±0.9 V ~ 2.625 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:10-TFSOP,10-MSOP(0.118",3.00mm 寬) 供應商設備封裝:10-MSOP 包裝:管件
    EL5210CSZ-T7 功能描述:IC AMP DUAL R-R I/O 30MHZ 8-SOIC RoHS:是 類別:集成電路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 標準包裝:50 系列:- 放大器類型:通用 電路數:2 輸出類型:滿擺幅 轉換速率:1.8 V/µs 增益帶寬積:6.5MHz -3db帶寬:4.5MHz 電流 - 輸入偏壓:5nA 電壓 - 輸入偏移:100µV 電流 - 電源:65µA 電流 - 輸出 / 通道:35mA 電壓 - 電源,單路/雙路(±):1.8 V ~ 5.25 V,±0.9 V ~ 2.625 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:10-TFSOP,10-MSOP(0.118",3.00mm 寬) 供應商設備封裝:10-MSOP 包裝:管件
    EL5210CY 功能描述:運算放大器 - 運放 DUAL R-R 30MHZ RoHS:否 制造商:STMicroelectronics 通道數量:4 共模抑制比(最小值):63 dB 輸入補償電壓:1 mV 輸入偏流(最大值):10 pA 工作電源電壓:2.7 V to 5.5 V 安裝風格:SMD/SMT 封裝 / 箱體:QFN-16 轉換速度:0.89 V/us 關閉:No 輸出電流:55 mA 最大工作溫度:+ 125 C 封裝:Reel