
1
FN7389.3
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143
Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2002-2004. All Rights Reserved. Elantec is a registered trademark of Elantec Semiconductor, Inc.
All other trademarks mentioned are the property of their respective owners.
EL5164, EL5165, EL5364
600MHz Current Feedback Amplifiers with
Enable
The EL5164, EL5165, and EL5364 are
current feedback amplifiers with a very
high bandwidth of 600MHz. This
makes these amplifiers ideal for today’s high speed video
and monitor applications.
With a supply current of just 5mA and the ability to run from
a single supply voltage from 5V to 12V, the amplifiers are
also ideal for hand held, portable or battery-powered
equipment.
The EL5164 also incorporates an enable and disable
function to reduce the supply current to 100μA typical per
amplifier. Allowing the CE pin to float or applying a low logic
level will enable the amplifier.
The EL5165 is offered in the 5-pin SOT-23 package, EL5164
is available in the 6-pin SOT-23 and the industry-standard 8-
pin SO packages, and the EL5364 in a 16-pin SO and 16-pin
QSOP packages. All operate over the industrial temperature
range of -40°C to +85°C.
Features
600MHz -3dB bandwidth
4700V/μs slew rate
5mA supply current
Single and dual supply operation, from 5V to 12V supply
span
Fast enable/disable (EL5164 & EL5364 only)
Available in SOT-23 packages
Dual (EL5264 & EL5265) and triple (EL5362 & EL5363)
also available
High speed, 1GHz product available (EL5166 & EL5167)
300MHz product available (EL5162 family)
Pb-free available
Applications
Video amplifiers
Cable drivers
RGB amplifiers
Test equipment
Instrumentation
Current to voltage converters
Ordering Information
PART
NUMBER
PACKAGE
TAPE &
REEL
PKG.
DWG. #
EL5164IS
8-Pin SO
-
MDP0027
EL5164IS-T7
8-Pin SO
7”
MDP0027
EL5164IS-T13
8-Pin SO
13”
MDP0027
EL5164IW-T7
6-Pin SOT-23
7” (3K pcs)
MDP0038
EL5164IW-T7A
6-Pin SOT-23
7” (250 pcs)
MDP0038
EL5165IW-T7
5-Pin SOT-23
7” (3K pcs)
MDP0038
EL5165IW-T7A
5-Pin SOT-23
7” (250 pcs)
MDP0038
EL5165IC-T7
5-Pin SC-70
7” (3K pcs)
P5.049
EL5165IC-T7A
5-Pin SC-70
7” (250 pcs)
P5.049
EL5364IS
16-Pin SO (0.150”)
-
MDP0027
EL5364IS-T7
16-Pin SO (0.150”)
7”
MDP0027
EL5364IS-T13
16-Pin SO (0.150”)
13”
MDP0027
EL5364IU
16-Pin QSOP
-
MDP0040
EL5364IU-T7
16-Pin QSOP
7”
MDP0040
EL5364IU-T13
16-Pin QSOP
13”
MDP0040
EL5364IUZ
(See Note)
16-Pin QSOP
(Pb-free)
-
MDP0040
EL5364IUZ-T7
(See Note)
16-Pin QSOP
(Pb-free)
7”
MDP0040
EL5364IUZ-
T13 (See Note)
16-Pin QSOP
(Pb-free)
13”
MDP0040
NOTE: Intersil Pb-free products employ special Pb-free material sets; molding
compounds/die attach materials and 100% matte tin plate termination finish,
which is compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow temperatures that
meet or exceed the Pb-free requirements of IPC/JEDEC J Std-020B.
Data Sheet
June 22, 2004