
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774
| Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2004, 2006, 2007. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.
EL5100, EL5101, EL5300
200MHz Slew Enhanced VFA
The EL5100, EL5101, and EL5300 represent high-speed
voltage feedback amplifiers based on the current feedback
amplifier architecture. This gives the typical high slew rate
benefits of a CFA family along with the stability and ease of
use associated with the VFA type architecture. This family is
available in single, dual, and triple versions, with 200MHz,
400MHz, and 700MHz versions. This family operates on
single 5V or ±5V supplies from minimum supply current. The
EL5100 and EL5300 also feature an output enable function,
which can be used to put the output in to a high-impedance
mode. This enables the outputs of multiple amplifiers to be
tied together for use in multiplexing applications.
Features
Pb-free plus anneal available (RoHS compliant)
Specified for 5V or ±5V applications
Power-down to 17A/amplifier
-3dB bandwidth = 200MHz
±0.1dB bandwidth = 20MHz
Low supply current = 2.5mA
Slew rate = 2200V/s
Low offset voltage = 4mV max
Output current = 100mA
AVOL = 1000
Diff gain/phase = 0.08%/0.1°
Applications
Video amplifiers
PCMCIA applications
A/D drivers
Line drivers
Portable computers
High speed communications
RGB applications
Broadcast equipment
Active filtering
May 3, 2007
FN7330.3
Data Sheet