
1
FN7047
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143
Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2003. All Rights Reserved. Elantec is a registered trademark of Elantec Semiconductor, Inc.
All other trademarks mentioned are the property of their respective owners.
EL2130
85MHz Current Feedback Amplifier
The EL2130 is a wideband current
mode feedback amplifier optimized for
gains between -10 and +10 while
operating on ±5V power supplies. Built using Elantec's
Complementary Bipolar process, this device exhibits -3dB
bandwidths in excess of 85MHz at unity gain and 75MHz at
a gain of two. The EL2130 is capable of output currents in
excess of 50mA giving it the ability to drive either double or
single terminated 50
coaxial cables.
Exhibiting a Differential Gain of 0.03% and a Differential
Phase of 0.1° at NTSC and PAL frequencies, the EL2130 is
an excellent low cost solution to most video applications.
In addition, the EL2130 exhibits very low gain peaking,
typically below 0.1dB to frequencies in excess of 40MHz as
well as 50ns settling time to 0.2% making it an excellent
choice for driving flash A/D converters.
The device is available in the plastic 8-pin narrow-body small
outline (SO) and the 8-pin mini DIP packages, and operates
over the temperature range of 0°C to +75°C
Pinout
Features
-3dB bandwidth = 85MHz, A
V
= 1
-3dB bandwidth = 75MHz, A
V
= 2
NTSC/PAL dG
≤
0.03%, dP
≤
0.1°
50mA output current
Drives ±2.5V into 100
load
Low voltage noise = 4nV
√
Hz
Current mode feedback
Low cost
Applications
Video amplifier
Video distribution amplifier
Residue amplifiers in ADC
Current to voltage converter
Coaxial cable driver
Manufactured under U.S. Patent No. 4,893,091.
EL2130
(8-PIN PDIP, SO)
TOP VIEW
Ordering Information
PART
NUMBER
TEMP. RANGE
PACKAGE
PKG. NO.
EL2130CN
0°C to +75°C
8-Pin PDIP
MDP0031
EL2130CS
0°C to +75°C
8-Pin SO
MDP0027
Data Sheet
December 1995, Rev. C
1-888-INTERSIL or www.intersil.com/tsc
NO REOBSOLETE PRODUCT
contact our Technical Support Center at