MANUFACTURER

CATEGORY

SERIES

PACKAGE

VOLTAGE

CLASS

REV

ECLIPTEK CORP.

OSCILLATOR

EC31

14 pin DIP

5.0V

OS13

08/06

00=±100ppm Maximum (Standard)

45=±50ppm Maximum, 25=±25ppm Maximum

20=±20ppm Maximum

Blank=50 ±10(%) (Standard), T=50 ±5(%)

Blank=±50ppm Minimum (Standard)

A=±100ppm Minimum

B=±150ppm Minimum,

C=±200ppm Minimum (2.5V

Blank=None (Standard)

CLXXX=Custom Lead Length (See Page 133)

G=Full Size Gull Wing (See Page 132)

Blank=0°C to 70°C (Standard)

ET=-40°C to 85°C

Blank=20% Maximum(Standard)

05=5% Maximum, 10=10% Maximum

15=15% Maximum

PART NUMBERING GUIDE

NOTES

__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

MECHANICAL DIMENSIONS

ALL DIMENSIONS IN MILLIMETERS

MARKING SPECIFICATIONS

ENVIRONMENTAL/MECHANICAL SPECIFICATIONS

Characteristic

Specification

Seal Integrity

Bubble test in Perfluorocarbon at +125°C ±5°C for 60 seconds

minimum.

Solderability

Sn63 Solder dip at +230°C ±5°C for 5 seconds/95% coverage.

Marking Permanency

10 Strokes with brush after 1 minute soak in solvent, 3 times.

Shock

Random drop on hard wooden plate 3 times from a height

of 20cm.

Vibration

Frequency with an amplitude of 1.5mm sweeping between 10Hz

to 55Hz within 1 minute (approximately) for 2 hours minimum on

each axis (X, Y and Z) for a total of 6 hours.

Line 1: ECLIPTEK

Line 2: EC31

Series Designator

Line 3: XX.XXX M

Frequency in MHz

(5 Digits Maximum + Decimal)

Line 4: XX Y ZZ

Week of Year

Last Digit of Year

Ecliptek Manufacturing Identifier

Note: Pin 1 shall be designated with a dot

Pin 1: Control Voltage (V

Pin 7: Case Ground

Pin 8: Output

Pin 14: Supply Voltage

800-ECLIPTEK www.ecliptek.com for latest revision

Specifications subject to change without notice.