- 您現在的位置：買賣IC網 > PDF目錄362594 > EB-RD35 (Gennum Corporation) GENLINX-TM II EB-RD35 Evaluation Board PDF資料下載
參數資料
| 型號： | EB-RD35 |
| 廠商： | Gennum Corporation |
| 英文描述： | GENLINX-TM II EB-RD35 Evaluation Board |
| 中文描述： | GENLINX -商標二EB病毒RD35評估板 |
| 文件頁數： | 1/9頁 |
| 文件大小： | 226K |
| 代理商： | EB-RD35 |
PRELIMINARY
GENLINX
II
EB-RD35 Evaluation Board
EB-RD35 BLOCK DIAGRAM
Document No. VB2930 - 1
INTRODUCTION
The EB-RD35 is an evaluation and reference design
platform for Routing and Distribution applications using the
GENLINX
II
GS9024 Equalizer, the GS9035 Reclocker,
and the GS9028 Cable Driver.
CIRCUIT DESCRIPTION
A functional block diagram is shown below and illustrates
the primary circuit functions. These include equalization,
reclocking, and driving 75
co-axial cables. A complete
schematic is also included.
The EB-RD35 accepts a serial digital data input signal
which first goes into the GS9024 equalizer. Equalization
of the input signal is completely automatic for signal
attenuation due to cable length from 0dB to in excess of
30dB. The signal strength/carrier detect output of the
equalizer, which is proportional to the amount of equalization
taking place, is available via test point TP3. Also available
as an output, is the equalizer "Output Eye Monitor" signal
via a SMA connector (J6). The signal strength/carrier
detect and Output Eye Monitor are useful diagnostic
outputs.
After equalization, the differential data signal is passed
to the GS9035 reclocker which generates clock and
retimed data signals. In addition, the complementary
serial clock output signals are available at BNC connectors
J2 and J3. The GS9035 also drives data rate indication
LEDs and a LOCK LED which is provided to visually
indicate when the reclocker has locked to the incoming
video signal.
The reclocked data signals are then supplied to the
GS9028 cable driver which provides two complementary
data outputs at BNC connectors J4 and J5. The GS9028
is configured to drive 75
co-axial cables with SMPTE
defined 800mV levels.
BOARD SET-UP AND TEST
The board is configured in SMPTE, auto-tune mode and
supports five data rates: 143Mb/s, 177Mb/s, 270Mb/s,
360Mb/s, and 540Mb/s. LED indicators are used to indicate
when the device is LOCKed and the detected data rate as
shown below:
SS2
0
0
0
0
1
SS1
0
0
1
1
0
SS0
0
1
0
1
0
143Mb/s
177Mb/s
270Mb/s
360Mb/s
540Mb/s
The GS9035 can also be configured for manual mode by
first putting the AUTO/MANUAL jumper (JMP2) into the 2-
3 position. Then jumpers JMP[7:5] are set accordingly.
Note that whenever the AUTO/MANUAL input of the GS9035
is HIGH (auto mode), jumpers JMP[7:5] should be left
floating to avoid bus contention.
SERIAL
DATA
OUTPUTS
GS9024
EQUALIZER
GS9035
RECLOCKER
GS9028
CABLE
DRIVER
SERIAL
CLOCK
OUTPUTS
SERIAL
DATA
INPUT
1
相關PDF資料 |
PDF描述 |
|---|---|
| EB212 | Using Data Sheet Impedances for RF LDMOS Devices |
| EB346 | Semiconductor Products Sector Engineering Bulletin |
| EB381 | Migrating from the MC68HC811E2 to the MC68HC11F1 |
| EB381D | Migrating from the MC68HC811E2 to the MC68HC11F1 |
| EB38 | MEASURING THE INTERMODULATION DISTORTION OF LINEAR AMPLIFIERS |
相關代理商/技術參數 |
參數描述 |
|---|---|
| EBRMP-1 | 功能描述:TIP REMOVAL PAD RoHS:是 類別:焊接、脫焊、返修產品 >> 配件 系列:- 標準包裝:1 系列:- 附件類型:Solder Pot 適用于相關產品:- |
| EB-RMS | 制造商:MURATA 制造商全稱:Murata Manufacturing Co., Ltd. 功能描述:AC-to-RMS Converter Application Board for DMS-30PC/LCD Meters |
| EB-RSD67B | 制造商:Panasonic Industrial Company 功能描述:CABLE |
| EBS.1S.302.CLL | 功能描述:環形推拉式連接器 RECEPTACLE RoHS:否 制造商:Hirose Connector 產品類型:Connectors 系列:HR10 觸點類型:Socket (Female) 外殼類型:Receptacle 觸點數量:4 外殼大小:7 安裝風格:Panel 端接類型:Solder 電流額定值:2 A |
| EBS.1S.303.CLL | 功能描述:環形推拉式連接器 RECEPTACLE RoHS:否 制造商:Hirose Connector 產品類型:Connectors 系列:HR10 觸點類型:Socket (Female) 外殼類型:Receptacle 觸點數量:4 外殼大小:7 安裝風格:Panel 端接類型:Solder 電流額定值:2 A |
發布緊急采購，3分鐘左右您將得到回復。