The DS80C320/DS80C323 incorporate a precision bandg" />
參數資料
型號： DS80C320-ECG/T&R
廠商： Maxim Integrated Products
文件頁數： 7/38頁
文件大?。?/td> 0K
描述： IC MCU HI SPEED 25MHZ 44-TQFP
標準包裝： 500
系列： 80C
核心處理器： 8051
芯體尺寸： 8-位
速度： 25MHz
連通性： EBI/EMI，SIO，UART/USART
外圍設備： 電源故障復位，WDT
輸入/輸出數： 32
程序存儲器類型： ROMless
RAM 容量： 256 x 8
電壓 - 電源 (Vcc/Vdd)： 4.5 V ~ 5.5 V
振蕩器型： 外部
工作溫度： 0°C ~ 70°C
封裝/外殼： 44-TQFP
包裝： 帶卷 (TR)
DS80C320/DS80C323 High-Speed/Low-Power Microcontrollers
15 of 38
POWER-FAIL RESET
The DS80C320/DS80C323 incorporate a precision bandgap voltage reference to determine when VCC is
out of tolerance. While powering up, internal circuits will hold the device in a reset state until VCC rises
above the VRST reset threshold. Once VCC is above this level, the oscillator will begin running. An internal
reset circuit will then count 65,536 clocks to allow time for power and the oscillator to stabilize. The
microcontroller will then exit the reset condition. No external components are needed to generate a power
on reset. During power-down or during a severe power glitch, as VCC falls below VRST, the
microcontroller will also generate its own reset. It will hold the reset condition as long as power remains
below the threshold. This reset will occur automatically, needing no action from the user or from the
software. See the Electrical Specifications section for the exact value of VRST.
POWER-FAIL INTERRUPT
The same reference that generates a precision reset threshold can also generate an optional early warning
Power-fail Interrupt (PFI). When enabled by the application software, this interrupt always has the
highest priority. On detecting that the VCC has dropped below VPFW and that the PFI is enabled, the
processor will vector to ROM address 0033h. The PFI enable is located in the Watchdog Control SFR
(WDCON to D8h). Setting WDCON.5 to logic 1 will enable the PFI. The application software can also
read a flag at WDCON.4. This bit is set when a PFI condition has occurred. The flag is independent of the
interrupt enable and software must manually clear it.
WATCHDOG TIMER
For applications that cannot afford to run out of control, the DS80C320/DS80C323 incorporate a
programmable watchdog timer circuit. The watchdog timer circuit resets the microcontroller if software
fails to reset the watchdog before the selected time interval has elapsed. The user selects one of four
timeout values. After enabling the watchdog, software must reset the timer prior to expiration of the
interval, or the CPU will be reset. Both the Watchdog Enable and the Watchdog Reset bits are protected
by a “Timed Access” circuit. This prevents accidentally clearing the watchdog. Timeout values are
precise since they are related to the crystal frequency as shown in Table 3. For reference, the time periods
at 25MHz are also shown.
The watchdog timer also provides a useful option for systems that may not require a reset. If enabled,
then 512 clocks before giving a reset, the watchdog will give an interrupt. The interrupt can also serve as
a convenient time-base generator, or be used to wake-up the processor from Idle mode. The watchdog
function is controlled in the Clock Control (CKCON to 8Eh), Watchdog Control (WDCON to D8h), and
Extended Interrupt Enable (EIE to E8h) SFRs. CKCON.7 and CKCON.6 are called WD1 and WD0,
respectively, and are used to select the watchdog timeout period as shown in Table 3.
Table 3. Watchdog Timeout Values
WD1
WD0
INTERRUPT
TIMEOUT
TIME (at
25MHz)
RESET
TIMEOUT
TIME
(at 25MHz)
0
217 clocks
5.243ms
217 + 512 clocks
5.263ms j
0
1
220 clocks
41.94ms
220 + 512 clocks
41.96ms
1
0
223 clocks
335.54ms
223 + 512 clocks
335.56ms
1
226 clocks
2684.35ms
226 + 512 clocks
2684.38ms
As Table 3 shows, the watchdog timer uses the crystal frequency as a time base. A user selects one of
four counter values to determine the timeout. These clock counter lengths are 217 = 131,072 clocks;
220 = 1,048,576; 223 = 8,388,608 clocks; or 226 = 67,108,864 clocks. The times shown in Table 4 are with
相關PDF資料
PDF描述
DS87C530-ENL IC MCU EPR/ROM W/RTC 33MZ 52TQFP
DS87C530-ECL IC MCU EPR/ROM W/RTC 33MZ 52TQFP
1061541021 ADPT OPT MULTIMODE SC-ST BEIGE
1061541011 ADPT OPT MULTIMODE FC-SC BEIGE
DS80C323-ECD IC MCU HI SPEED 18MHZ 44-TQFP
相關代理商/技術參數
參數描述
DS80C320-ECL 功能描述:8位微控制器 -MCU High-Speed Low-Power RoHS:否 制造商:Silicon Labs 核心:8051 處理器系列:C8051F39x 數據總線寬度:8 bit 最大時鐘頻率:50 MHz 程序存儲器大小:16 KB 數據 RAM 大小:1 KB 片上 ADC:Yes 工作電源電壓:1.8 V to 3.6 V 工作溫度范圍:- 40 C to + 105 C 封裝 / 箱體:QFN-20 安裝風格:SMD/SMT
DS80C320-ECL/T&R 制造商:Maxim Integrated Products 功能描述:IC MCU HI SPEED 33MHZ 44-TQFP
DS80C320-ECL/T&R 功能描述:IC MCU HI SPEED 33MHZ 44-TQFP RoHS:否 類別:集成電路 (IC) >> 嵌入式 - 微控制器， 系列:80C 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:260 系列:73S12xx 核心處理器:80515 芯體尺寸:8-位 速度:24MHz 連通性:I²C，智能卡，UART/USART，USB 外圍設備:LED，POR，WDT 輸入/輸出數:9 程序存儲器容量:64KB（64K x 8） 程序存儲器類型:閃存 EEPROM 大小:- RAM 容量:2K x 8 電壓 - 電源 (Vcc/Vdd):2.7 V ~ 5.5 V 數據轉換器:- 振蕩器型:內部 工作溫度:-40°C ~ 85°C 封裝/外殼:68-VFQFN 裸露焊盤 包裝:管件
DS80C320-ECL+ 功能描述:8位微控制器 -MCU High-Speed Low-Power RoHS:否 制造商:Silicon Labs 核心:8051 處理器系列:C8051F39x 數據總線寬度:8 bit 最大時鐘頻率:50 MHz 程序存儲器大小:16 KB 數據 RAM 大小:1 KB 片上 ADC:Yes 工作電源電壓:1.8 V to 3.6 V 工作溫度范圍:- 40 C to + 105 C 封裝 / 箱體:QFN-20 安裝風格:SMD/SMT
DS80C320-ECR 制造商:DALLAS 制造商全稱:Dallas Semiconductor 功能描述:High-Speed Microcontroller User Guide
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*