- 您現在的位置：買賣IC網 > Datasheet目錄40 > DS75U+T&R (Maxim Integrated)IC THERMOMETER/STAT DIG 8-MSOP Datasheet資料下載
參數資料
| 型號： | DS75U+T&R |
| 廠商： | Maxim Integrated |
| 文件頁數： | 7/14頁 |
| 文件大?。?/td> | 183K |
| 描述： | IC THERMOMETER/STAT DIG 8-MSOP |
| 產品培訓模塊： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 標準包裝： | 3,000 |
| 功能： | 溫度計，恒溫計 |
| 傳感器類型： | 內部 |
| 感應溫度： | -55°C ~ 125°C |
| 精確度： | ±3°C（最小值） |
| 拓?fù)洌?/td> | ADC（三角積分型），比較器，寄存器庫 |
| 輸出類型： | I²C?/SMBus? |
| 輸出警報： | 無 |
| 輸出風扇： | 無 |
| 電源電壓： | 2.7 V ~ 5.5 V |
| 工作溫度： | -55°C ~ 125°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 8-TSSOP，8-MSOP（0.118"，3.00mm 寬） |
| 供應商設備封裝： | 8-uMAX |
| 包裝： | 帶卷 (TR) |
第1頁第2頁第3頁第4頁第5頁第6頁當前第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁
DS75
7 of 14
Figure 3. TEMPERATURE, T
H
, and T
L
REGISTER FORMAT
bit 15
bit 14
bit 13
bit 12
bit 11
bit 10
bit 9
bit 8
MS Byte
S
2
6
2
5
2
4
2
3
2
2
2
1
2
0
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
LS Byte
2
-1
2
-2
2
-3
2
-4
0
0
0
0
Table 3. 12-BIT RESOLUTION TEMPERATURE/DATA RELATIONSHIP
TEMPERATURE
(?/SPAN>C)
DIGITAL OUTPUT
(BINARY)
DIGITAL OUTPUT
(HEX)
+125
0111 1101 0000 0000
7D00h
+25.0625
0001 1001 0001 0000
1910h
+10.125
0000 1010 0010 0000
0A20h
+0.5
0000 0000 1000 0000
0080h
0
0000 0000 0000 0000
0000h
-0.5
1111 1111 1000 0000
FF80h
-10.125
1111 0101 1110 0000
F5E0h
-25.0625
1110 0110 1111 0000
E6F0h
-55
1100 1001 0000 0000
C900h
SHUTDOWN MODE
For power-sensitive applications, the DS75 offers a low-power shutdown mode. The SD bit in the
configuration register controls shutdown mode. When SD is changed to 1, the conversion in progress
will be completed and the result stored in the temperature register after which the DS75 will go into a
low-power standby state. The O.S. output will be cleared if the thermostat is operating in interrupt mode
and O.S will remain unchanged in comparator mode. The 2-wire interface remains operational in
shutdown mode, and writing a 0 to the SD bit returns the DS75 to normal operation.
OPERATIONTHERMOSTAT
The DS75 thermostat has two operating modes, comparator mode and interrupt mode, which activate and
deactivate the open-drain thermostat output (O.S.) based on user-programmable trip-points (T
OS
and
T
HYST
). The DS75 powers up with the thermostat in comparator mode with active-low O.S. polarity and
with the over-temperature trip-point (T
OS
) register set to 80癈 and the hysteresis trip-point (T
HYST
)
register set to 75癈. If these power-up settings are compatible with the application, the DS75 can be used
as a standalone thermostat (i.e., no 2wire communication required). If interrupt mode operation, active-
high O.S. polarity or different T
OS
and T
HYST
values are desired, they must be programmed after power-
up, so standalone operation is not possible.
In both operating modes, the user can program the thermostat fault tolerance, which sets how many
consecutive temperature readings (1, 2, 4, or 6) must fall outside of the thermostat limits before the
thermostat output is triggered. The fault tolerance is set by the F1 and F0 bits in the configuration and at
power-up the fault tolerance is 1.
The data format of the T
OS
and T
HYST
registers is identical to that of the temperature register (see Figure
3), i.e., a two-byte twos complement representation of the trip-point temperature in degrees centigrade
with bits 3 through 0 hardwired to 0. After every temperature conversion, the measured temperature is
相關PDF資料 |
PDF描述 |
|---|---|
| FAN4010IL6X_F113 | IC CURRENT SENSE 0.2% 6MLP |
| FAN5069EMTCX | IC REG DL BCK/LINEAR 16TSSOP |
| HIP1011BCB-T | IC CTRLR HOT PLUG PCI 16-SOIC |
| HIP1020CK-T | IC CTRLR HOT PLUG SOT23-5 |
| HIP6018BCBZ-T | IC REG TRPL BCK/LINEAR 24-SOIC |
相關代理商/技術參數 |
參數描述 |
|---|---|
| DS-7604HI-S | 制造商:Hikvision USA 功能描述:4-Chnl Hybrid Network DVRVga 1Tb Max 720P Chnl 制造商:HIKVISION 功能描述:4-CHNL HYBRID NETWORK DVR VGA 1TB MAX 720P CHNL |
| DS-7604NI-SE/P | 制造商:Hikvision USA 功能描述:4-Channel Embedded Plug and Play DVR with Built-In 4-Channel PoE Switch 制造商:HIKVISION 功能描述:NVR 4-CHANNEL H264 NO HDD HDMI AND INTEGRATED 4-PORT POE |
| DS-7608NI-SE/8P | 制造商:Hikvision USA 功能描述:8-Channel Embedded Plug and Play DVR with Built-In 8-Channel PoE Switch 制造商:HIKVISION 功能描述:NVR 8-CHANNEL H264 NO HDD HDMI AND INTEGRATED 8-PORT POE |
| DS760SL-3 | 功能描述:線性和開關式電源 748W 12V 63.3A FRONT END SLIMLINE RoHS:否 制造商:TDK-Lambda 產品:Switching Supplies 開放式框架/封閉式:Enclosed 輸出功率額定值:800 W 輸入電壓:85 VAC to 265 VAC 輸出端數量:1 輸出電壓（通道 1）:20 V 輸出電流（通道 1）:40 A 商用/醫用: 輸出電壓（通道 2）: 輸出電流（通道 2）: 安裝風格:Rack 長度: 寬度: 高度: |
| DS760SL-3-001 | 制造商:Emerson Network Power - Embedded Power 功能描述:12V OUTPUT, 5V STBY, 760W 1U X 1U X 12.67", REVERSE AIR - Bulk |
發布緊急采購，3分鐘左右您將得到回復。