參數資料
型號: DS75U/T&R
廠商: MAXIM INTEGRATED PRODUCTS INC
元件分類: Switch/Digital Output Temperature Sensor
英文描述: DIGITAL TEMP SENSOR-SERIAL, 12BIT(s), 2Cel, SQUARE, SURFACE MOUNT
封裝: MICRO MAX PACKAGE-8
文件頁數: 12/15頁
文件大小: 338K
代理商: DS75U/T&R
DS75
6 of 14
Figure 2. TIMING DIAGRAM
Note: The DS75 does not delay the SDA line internally with respect to SCL for any length of time.
OPERATION–MEASURING TEMPERATURE
The DS75 measures temperature using a bandgap temperature sensing architecture. An on-board delta-
sigma analog-to-digital converter (ADC) converts the measured temperature to a digital value that is
calibrated in degrees centigrade; for Fahrenheit applications a lookup table or conversion routine must be
used. The DS75 is factory-calibrated and requires no external components to measure temperature.
At power-up the DS75 immediately begins measuring the temperature and converting the temperature to
a digital value. The resolution of the digital output data is user-configurable to 9, 10, 11, or 12 bits,
corresponding to temperature increments of 0.5
°C, 0.25°C, 0.125°C, and 0.0625°C, respectively, with 9-
bit default resolution at power-up. The resolution is controlled via the R0 and R1 bits in the configuration
register as explained in the CONFIGURATION REGISTER section of this data sheet. Note that the
conversion time doubles for each additional bit of resolution.
After each temperature measurement and analog-to-digital conversion, the DS75 stores the temperature as
a 16-bit two’s complement number in the 2-byte temperature register (see Figure 3). The sign bit (S)
indicates if the temperature is positive or negative: for positive numbers S = 0 and for negative numbers S
= 1. The most recently converted digital measurement can be read from the temperature register at any
time. Since temperature conversions are performed in the background, reading the temperature register
does not affect the operation in progress.
Bits 3 through 0 of the temperature register are hardwired to 0. When the DS75 is configured for 12-bit
resolution, the 12 MSbs (bits 15 through 4) of the temperature register will contain temperature data. For
11-bit resolution, the 11 MSbs (bits 15 through 5) of the temperature register will contain data, and bit 4
will read out as 0. Likewise, for 10-bit resolution, the 10 MSbs (bits 15 through 6) will contain data, and
for 9-bit the 9 MSbs (bits 15 through 7) will contain data, and all unused LSbs will contain 0s. Table 3
gives examples of 12-bit resolution digital output data and the corresponding temperatures.
相關PDF資料
PDF描述
DS75U-C12+T&R DIGITAL TEMP SENSOR-SERIAL, 12BIT(s), 2Cel, SQUARE, SURFACE MOUNT
DS75U DIGITAL TEMP SENSOR-SERIAL, 12BIT(s), 2Cel, SQUARE, SURFACE MOUNT
DS75S DIGITAL TEMP SENSOR-SERIAL, 12BIT(s), 2Cel, RECTANGULAR, SURFACE MOUNT
DS80C310-QCG 8-BIT, MROM, 25 MHz, MICROCONTROLLER, PQCC44
DS80C310-MCG 8-BIT, MROM, 25 MHz, MICROCONTROLLER, PDIP40
相關代理商/技術參數
參數描述
DS-7604HI-S 制造商:Hikvision USA 功能描述:4-Chnl Hybrid Network DVRVga 1Tb Max 720P Chnl 制造商:HIKVISION 功能描述:4-CHNL HYBRID NETWORK DVR VGA 1TB MAX 720P CHNL
DS-7604NI-SE/P 制造商:Hikvision USA 功能描述:4-Channel Embedded Plug and Play DVR with Built-In 4-Channel PoE Switch 制造商:HIKVISION 功能描述:NVR 4-CHANNEL H264 NO HDD HDMI AND INTEGRATED 4-PORT POE
DS-7608NI-SE/8P 制造商:Hikvision USA 功能描述:8-Channel Embedded Plug and Play DVR with Built-In 8-Channel PoE Switch 制造商:HIKVISION 功能描述:NVR 8-CHANNEL H264 NO HDD HDMI AND INTEGRATED 8-PORT POE
DS760SL-3 功能描述:線性和開關式電源 748W 12V 63.3A FRONT END SLIMLINE RoHS:否 制造商:TDK-Lambda 產品:Switching Supplies 開放式框架/封閉式:Enclosed 輸出功率額定值:800 W 輸入電壓:85 VAC to 265 VAC 輸出端數量:1 輸出電壓(通道 1):20 V 輸出電流(通道 1):40 A 商用/醫用: 輸出電壓(通道 2): 輸出電流(通道 2): 安裝風格:Rack 長度: 寬度: 高度:
DS760SL-3-001 制造商:Emerson Network Power - Embedded Power 功能描述:12V OUTPUT, 5V STBY, 760W 1U X 1U X 12.67", REVERSE AIR - Bulk