
Low Cost Three-Way GMIC SMT Power Divider
DS54-0005
DS54-0005
M/A-COM Division of AMP Incorporated
I
North America: Tel. (800) 366-2266, Fax (800) 618-8883
I
Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087
I
Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
www.macom.com
AMP and Connecting at a Higher Level are trademarks.
The preliminary specifications data sheet contains typical electrical specifications which may change prior to final introduction.
V1.00
Features
Low Cost
Small Size and Low Profile
Industry Standard SOIC-8 SMT Plastic Package
Superior Repeatability (Lot-to-Lot Variation)
Typical Insertion Loss: 0.8 dB
Typical Isolation: 24 dB
Typical Amplitude Balance: 0.3 dB
Description
M/A-COM’s DS54-0005 is an IC-based monolithic power divider
using M/A-COM’s GMIC technology in a low cost SOIC-8
plastic package. This 4-way power divider is ideally suited for
applications where PCB real estate is at a premium and standard
packaging for automated assembly and low cost are critical.
Typical applications include infrastructure, portables, and periph-
eral devices (PCMCIA cards) for wireless standards such as GSM,
AMPS, CDPD, RAM, and ARDIS. Available in tape and reel.
The DS54-0005 is fabricated using a passive-integrated circuit
process. The process features full-chip passivation for increased
performance and reliability.
SOIC-8
1. If specific reel size is required, consult factory for part number
assignment.
Part Number
Package
DS54-0005
DS54-0005-TR
DS54-0005-RTR
SOIC 8-Lead Plastic Package
Forward Tape and Reel
1
Reverse Tape and Reel
1
1. All specifications apply with a 50-ohm source and load impedance.
Typical Electrical Specifications
1
, T
A
= +25oC
Parameters
Units
dB
dB
—
—
dB
°
Min.
—
20
—
—
—
—
Typ.
0.8
24
1.4:1
1.25:1
0.3
3
Max.
1.1
—
1.7:1
1.5:1
0.6
6
Insertion Loss Above 6.0 dB
Isolation
VSWR
Input
Output
Amplitude Balance
Phase Balance
Ordering Information
Low Cost Four-Way GMIC SMT Power Divider
824 – 960 MHz
Preliminary Specifications