參數資料
型號: DS21Q44
元件分類: 通信及網絡
英文描述: Ultraframer DS3/E3/DS2/E2/DS1/E1/DS0
中文描述: Ultraframer DS3/E3/DS2/E2/DS1/E1/DS0
文件頁數: 57/105頁
文件大小: 620K
代理商: DS21Q44
DS21Q44
57 of 105
TNAF: TRANSMIT NON–ALIGN FRAME REGISTER
(Address=21 Hex)
(MSB)
Si
[Bit 2 must be programmed to one; the DS21Q44 does not automatically set this bit]
(LSB)
Sa8
1
A
Sa4
Sa5
Sa6
Sa7
SYMBOL
POSITION
NAME AND DESCRIPTION
Si
1
A
Sa4
Sa5
Sa6
Sa7
Sa8
TNAF.7
TNAF.6
TNAF.5
TNAF.4
TNAF.3
TNAF.2
TNAF.1
TNAF.0
International Bit.
Frame Non–Alignment Signal Bit.
Remote Alarm (used to transmit the alarm).
Additional Bit 4.
Additional Bit 5.
Additional Bit 6.
Additional Bit 7.
Additional Bit 8.
14.3 INTERNAL REGISTER SCHEME BASED ON CRC4 MULTIFRAME
On the receive side, there is a set of eight registers (RSiAF, RSiNAF, RRA, RSa4 to RSa8) that report the
Si and Sa bits as they are received. These registers are updated with the setting of the Receive CRC4
Multiframe bit in Status Register 2 (SR2.1). The host can use the SR2.1 bit to know when to read these
registers. The user has 2 ms to retrieve the data before it is lost. The MSB of each register is the first
received. Please see the register descriptions below and the Transmit Data Flow diagram in Section 18 for
more details. On the transmit side, there is also a set of eight registers (TSiAF, TSiNAF, TRA, TSa4 to
TSa8) that via the Transmit Sa Bit Control Register (TSaCR), can be programmed to insert both Si and Sa
data. Data is sampled from these registers with the setting of the Transmit Multiframe bit in Status
Register 2 (SR2.5). The host can use the SR2.5 bit to know when to update these registers. It has 2 ms to
update the data or else the old data will be retransmitted. The MSB of each register is the first bit
transmitted. Please see the register descriptions below and the Transmit Data Flow diagram in Section 18
for more details.
相關PDF資料
PDF描述
DS21Q44T Ultraframer DS3/E3/DS2/E2/DS1/E1/DS0
DS21Q44TN MICROSWITCH, SPDT, SIM ROLLER LEVER; Current, contact AC:5A; Force, operating:91.75gf; Travel, pre:16.0mm; Centres, fixing LxW:22.2mm; Temp, op. max:120(degree C); Temp, op. min:-40(degree C); Length / Height, external:9.25mm; Width, RoHS Compliant: Yes
DS2251T-128-16 CONNECTOR ACCESSORY
DS2251T-32-16 128k Soft Microcontroller Module
DS2251T-64-16 CONNECTOR ACCESSORY
相關代理商/技術參數
參數描述
DS21Q44T 功能描述:網絡控制器與處理器 IC Enhanced Quad E1 Framer RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流(最大值):595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS21Q44T+ 功能描述:網絡控制器與處理器 IC Enhanced Quad E1 Framer RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流(最大值):595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS21Q44TN 功能描述:網絡控制器與處理器 IC RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流(最大值):595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS21Q48 功能描述:網絡控制器與處理器 IC 5V Quad E1/T1/J1 Line Interface RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流(最大值):595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS21Q48A3N 功能描述:網絡控制器與處理器 IC 5V Quad E1/T1/J1 Line Interface RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流(最大值):595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray