參數資料
型號: DS2117MB
廠商: DALLAS SEMICONDUCTOR
元件分類: Bus Terminator
英文描述: 9-LINE 52 ohm SCSI BUS TERMINATOR, PDSO36
封裝: SSOP-36
文件頁數: 3/9頁
文件大?。?/td> 265K
代理商: DS2117MB
DS2117M
3 of 9
To ensure proper operation, the TPWR pin should be connected to the SCSI bus TERMPWR line. As
with all analog circuitry, the TERMPWR and VDD lines should be bypassed locally. A 2.2
F capacitor
and a 0.01
F high frequency capacitor is recommended between TPWR and ground and placed as close
as possible to the DS2117M. The DS2117M should be placed as close as possible to the SCSI connector
to minimize signal and power trace length, thereby resulting in less input capacitance and reflections
which can degrade the bus signals.
To maintain the specified regulation, a 4.7
F capacitor is required between the Vref pin (VREF) and
ground of each DS2117M. A high frequency cap (0.1
F ceramic recommended) can also be placed on
the Vref pin in applications that use fast rise/fall time drivers. A typical SCSI bus configuration is shown
in Figure 2.
DIFFSENS noise filtering The DS2117M incorporates a digital filter to remove high frequency
transients on the DIFFSENS control line, thereby eliminating erroneous switching between modes. This
filter eliminates the need for the external capacitor and resistor, which heretofore performed this function.
The external filter may be used in addition to the digital filter if the DS2117M and DS2118M are to be
used interchangeably.
NOTE:
DIFFSENS – Refers to the SCSI bus signal.
DIFFSENSE – Refers to the DS2117M pin name and internal circuitry capable of driving the
DIFFSENS line.
DIFF_CAP - Refers to the DS2117M pin name and internal circuitry relating to monitoring the
DIFFSENS line.
相關PDF資料
PDF描述
DS2118M 9-LINE SCSI BUS TERMINATOR, PDSO36
DS2119ME 9-LINE 52 ohm SCSI BUS TERMINATOR, PDSO28
DS2154LN DATACOM, FRAMER, PQFP100
DS2155GN DATACOM, FRAMER, PBGA100
DS2155L DATACOM, FRAMER, PQFP100
相關代理商/技術參數
參數描述
DS2117MB/T&R 制造商:Maxim Integrated Products 功能描述:IC TERM SCSI LVD/SE ULT-3 36SSOP
DS2117MB/T&R 功能描述:SCSI 接口集成電路 RoHS:否 制造商:Texas Instruments 工作電源電壓:2.7 V to 5.25 V 電源電流:13 mA 最大工作溫度:+ 70 C 最小工作溫度:0 C 安裝風格:SMD/SMT 封裝 / 箱體:SSOP-36 封裝:Tube
DS2117MB/T&R/ 功能描述:SCSI 接口集成電路 RoHS:否 制造商:Texas Instruments 工作電源電壓:2.7 V to 5.25 V 電源電流:13 mA 最大工作溫度:+ 70 C 最小工作溫度:0 C 安裝風格:SMD/SMT 封裝 / 箱體:SSOP-36 封裝:Tube
DS2117MX/T&R 制造商:Maxim Integrated Products 功能描述:IC TERM SCSI LVD/SE ULT-3 FCHIP
DS2117MX/T&R 功能描述:IC TERM SCSI LVD/SE ULT-3 FCHIP RoHS:否 類別:集成電路 (IC) >> 接口 - 信號終端器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:50 系列:- 類型:SCSI,SE 端子數:9 電源電壓:4 V ~ 5.25 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:16-SOIC(0.154",3.90mm 寬) 供應商設備封裝:16-SOIC 包裝:管件