- 您現在的位置：買賣IC網 > PDF目錄9406 > DS1682S+ (Maxim Integrated Products)IC TIMEKEEPER ALARM ELAPSE 8SOIC PDF資料下載
參數資料
| 型號： | DS1682S+ |
| 廠商： | Maxim Integrated Products |
| 文件頁數： | 2/14頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC TIMEKEEPER ALARM ELAPSE 8SOIC |
| 產品培訓模塊： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 標準包裝： | 100 |
| 類型： | 耗用時間計數器 |
| 特點： | 警報器，EEPROM |
| 存儲容量： | 10B |
| 時間格式： | 二進制 |
| 數據格式： | 二進制 |
| 接口： | I²C，2 線串口 |
| 電源電壓： | 2.5 V ~ 5.5 V |
| 工作溫度： | -40°C ~ 85°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 8-SOIC（0.154"，3.90mm 寬） |
| 供應商設備封裝： | 8-SOIC |
| 包裝： | 管件 |
| 產品目錄頁面： | 1434 (CN2011-ZH PDF) |
Bit 6: Alarm Flag (AF). The alarm flag is set to a 1 when
the ETC value matches the alarm register. Once the AF
bit is set to a 1, it cannot be set to a 0. This bit is read-only.
Bit 5: Write Disable Flag (WDF). When the write disable
command is written to AAh twice at memory location 1Eh,
the WDF is set to a 1 and cannot be cleared or reset.
When WDF is set to a 1, the alarm, ETC, and event coun-
ter registers are read-only. This bit is read-only. The writes
need not be consecutive. Cycling power on VCC prior to
the second write terminates the reset sequence.
Bit 4: Write-Memory-Disable Flag (WMDF). When the
write-memory-disable command is written to F0h twice
at memory location 1Fh, the WMDF is set to a 1 and
cannot be reset or cleared. Once the WMDF is set to a
1, the 10-byte user memory becomes read-only. This bit
is read-only. The writes need not be consecutive. Cycling
power on VCC prior to the second write terminates the
reset sequence.
Bit 3: Alarm Output Select (AOS). If AOS is 0 and AF is
true, the DS1682 activates the ALARM output during an
event when AF becomes true. The DS1682 also activates
the ALARM output by pulling the pin low four times at
power-up, at the start and end of an event, or when the
ALARM pin is pulled low and released. This output mode
can be used to flash an LED or to communicate with
another device to indicate that an alarm has occurred. AP
has no affect on the output when AOS is 0.
If AOS is a 1 and AF is true, the ALARM output is constant
when the alarm is active. AP determines the polarity of
the output.
Bit 2: Reset Enable (RE). The reset enable bit allows the
device to be reset by enabling the reset command. The
sections of the DS1682 that are reset are then dependent
on the value in the WDF. With the WDF set to 0 and the
reset enable bit set to a 1, the reset command clears
the ETC, EEPROM, and event counter. When the reset
enable bit is set to a 0, the reset command is disabled.
Bit 1: Alarm Polarity (AP). When the alarm polarity bit
in the configuration register is set to 0, the ALARM output
is high impedance during the period that the value in the
ETC is less than the alarm register value. When the ETC
matches the alarm value, the ALARM pin is driven low.
If the AP bit is set to a 1, the ALARM output is driven
low during the period that the ETC is less than the alarm
value.
When the ETC matches the alarm value, the ALARM pin
becomes high impedance. The AP bit has no affect if AOS
is set to a 0.
Bit 0: Event Counter MSB (ECMSB). This bit is read-
only.
Configuration Register
Note: The configuration register is not stored in EEPROM until an event becomes inactive. RE does not need to be stored in
EEPROM to reset the device.
MSB
LSB
BIT 7
BIT 6
BIT 5
BIT 4
BIT 3
BIT 2
BIT 1
BIT 0
0
AF
WDF
WMDF
AOS
RE
AP
ECMSB
DS1682
Total-Elapsed-Time Recorder
with Alarm
www.maximintegrated.com
Maxim Integrated │ 10
相關PDF資料 |
PDF描述 |
|---|---|
| D38999/26FE8PB | CONN PLUG 8POS STRAIGHT W/PINS |
| MS27474T22A55P | CONN RCPT 55POS JAM NUT W/PINS |
| MS27467E23F35PC | CONN PLUG 100POS STRAIGHT W/PINS |
| MS27466E23A53S | CONN RCPT 53POS WALL MT W/SCKT |
| VI-22M-MX-B1 | CONVERTER MOD DC/DC 10V 75W |
相關代理商/技術參數 |
參數描述 |
|---|---|
| DS1682S/GG8 | 制造商:Maxim Integrated Products 功能描述: |
| DS1682S/T&R | 制造商:Maxim Integrated Products 功能描述:REAL TIME CLOCK SERL 10BYTE 8SOIC - Tape and Reel 制造商:Maxim Integrated Products 功能描述:IC TIMEKEEPER ALARM ELAPSE 8SOIC |
| DS1682S/T&R | 功能描述:實時時鐘 Total-Elapsed-Time Recorder w/Alarm RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 總線接口:I2C 日期格式:DW:DM:M:Y 時間格式:HH:MM:SS RTC 存儲容量:64 B 電源電壓-最大:5.5 V 電源電壓-最小:1.8 V 最大工作溫度:+ 85 C 最小工作溫度: 安裝風格:Through Hole 封裝 / 箱體:PDIP-8 封裝:Tube |
| DS1682S/TR | 制造商:Maxim Integrated Products 功能描述: |
| DS1682S+ | 功能描述:實時時鐘 Total-Elapsed-Time Recorder w/Alarm RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 總線接口:I2C 日期格式:DW:DM:M:Y 時間格式:HH:MM:SS RTC 存儲容量:64 B 電源電壓-最大:5.5 V 電源電壓-最小:1.8 V 最大工作溫度:+ 85 C 最小工作溫度: 安裝風格:Through Hole 封裝 / 箱體:PDIP-8 封裝:Tube |
發布緊急采購，3分鐘左右您將得到回復。