- 您現在的位置：買賣IC網 > PDF目錄9324 > DS1553-70 (Maxim Integrated Products)IC RTC RAM Y2K 5V 70NS 28-EDIP PDF資料下載
參數資料
| 型號： | DS1553-70 |
| 廠商： | Maxim Integrated Products |
| 文件頁數： | 18/20頁 |
| 文件大小： | 0K |
| 描述： | IC RTC RAM Y2K 5V 70NS 28-EDIP |
| 產品培訓模塊： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 標準包裝： | 12 |
| 類型： | 時鐘/日歷 |
| 特點： | 警報器，閏年，NVSRAM，監視計時器，Y2K |
| 存儲容量： | 8KB |
| 時間格式： | HH:MM:SS（24 小時） |
| 數據格式： | YY-MM-DD-dd |
| 接口： | 并聯 |
| 電源電壓： | 4.5 V ~ 5.5 V |
| 工作溫度： | 0°C ~ 70°C |
| 安裝類型： | 通孔 |
| 封裝/外殼： | 28-DIP 模塊（0.600"，15.24mm） |
| 供應商設備封裝： | 28-EDIP |
| 包裝： | 管件 |
DS1553 64kB, Nonvolatile, Year-2000-Compliant Timekeeping RAM
7 of 20
READING THE CLOCK
When reading the RTC data, it is recommended to halt updates to the external set of double-buffered RTC
registers. This puts the external registers into a static state, allowing data to be read without register
values changing during the read process. Normal updates to the internal registers continue while in this
state. External updates are halted when a 1 is written into the read bit, B6 of the Control register (1FF8h).
As long as a 1 remains in the Control register read bit, updating is halted. After a halt is issued, the
registers reflect the RTC count (day, date, and time) that was current at the moment the halt command
was issued. Normal updates to the external set of registers resume within 1 second after the read bit is set
to 0 for a minimum of 500
s. The read bit must be 0 for a minimum of 500s to ensure the external
registers are updated.
SETTING THE CLOCK
The 8th bit, B7 of the Control register, is the write bit. Setting the write bit to 1, like the read bit, halts
updates to the DS1553 (1FF8h–1FFFh) registers. After setting the write bit to 1, RTC registers can be
loaded with the desired RTC count (day, date, and time) in 24-hour BCD format. Setting the write bit to 0
then transfers the values written to the internal RTC registers and allows normal operation to resume.
CLOCK ACCURACY (DIP MODULE)
The DS1553 is guaranteed to keep time accuracy to within
1 minute per month at +25C. The RTC is
calibrated at the factory by Dallas Semiconductor using nonvolatile tuning elements and does not require
additional calibration. For this reason, methods of field clock calibration are not available and not
necessary. The electrical environment also affects clock accuracy and caution should be taken to place the
RTC in the lowest level EMI section of the PC board layout. For additional information, refer to
Application Note 58: Crystal Considerations with Dallas Real-Time Clocks, available on our website at
CLOCK ACCURACY (PowerCap MODULE)
The DS1553 and DS9034PCX are each individually tested for accuracy. Once mounted together, the
module typically keeps time accuracy to within
1.53 minutes per month (35ppm) at +25°C. The
electrical environment affects clock accuracy and caution should be taken to place the RTC in the lowest
level EMI section of the PC board layout. For additional information, refer to Application Note 58:
Crystal
Considerations
with
Dallas
Real-Time
Clocks,
available
on
our
website
at
FREQUENCY TEST MODE
The DS1553 frequency test mode uses the open-drain IRQ /FT output. With the oscillator running, the
IRQ
/FT output toggles at 512Hz when the FT bit is 1, the Alarm Flag Enable bit (AE) is 0, and the
Watchdog Steering bit (WDS) is 1 or the Watchdog register is reset (Register 1FF7h = 00h). The IRQ /FT
output and the frequency test mode can be used as a measure of the actual frequency of the 32.768kHz
RTC oscillator. The IRQ /FT pin is an open-drain output that requires a pullup resistor for proper
operation. The FT bit is cleared to 0 on power-up.
相關PDF資料 |
PDF描述 |
|---|---|
| MCP4331T-103E/ST | IC DGTL POT QUAD 10K 20TSSOP |
| MS27505E21F35PC | CONN RCPT 79POS BOX MNT W/PINS |
| MCP41050T-I/SN | IC POT DIGITAL 50K 1CH SPI 8SOIC |
| DS1743P-70 | IC RTC RAM Y2K 5V 70NS 34-PCM |
| VE-BNT-IU-F4 | CONVERTER MOD DC/DC 6.5V 200W |
相關代理商/技術參數 |
參數描述 |
|---|---|
| DS1553-70+ | 功能描述:實時時鐘 RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 總線接口:I2C 日期格式:DW:DM:M:Y 時間格式:HH:MM:SS RTC 存儲容量:64 B 電源電壓-最大:5.5 V 電源電壓-最小:1.8 V 最大工作溫度:+ 85 C 最小工作溫度: 安裝風格:Through Hole 封裝 / 箱體:PDIP-8 封裝:Tube |
| DS1553-85+ | 功能描述:實時時鐘 64kB NV RAM Timekeeper RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 總線接口:I2C 日期格式:DW:DM:M:Y 時間格式:HH:MM:SS RTC 存儲容量:64 B 電源電壓-最大:5.5 V 電源電壓-最小:1.8 V 最大工作溫度:+ 85 C 最小工作溫度: 安裝風格:Through Hole 封裝 / 箱體:PDIP-8 封裝:Tube |
| DS1553P | 制造商:DALLAS 制造商全稱:Dallas Semiconductor 功能描述:64kB, Nonvolatile, Year-2000-Compliant Timekeeping RAM |
| DS1553P/YP/WP | 制造商:MAXIM 制造商全稱:Maxim Integrated Products 功能描述:PowerCap with Crystal |
| DS1553P-100 | 功能描述:實時時鐘 RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 總線接口:I2C 日期格式:DW:DM:M:Y 時間格式:HH:MM:SS RTC 存儲容量:64 B 電源電壓-最大:5.5 V 電源電壓-最小:1.8 V 最大工作溫度:+ 85 C 最小工作溫度: 安裝風格:Through Hole 封裝 / 箱體:PDIP-8 封裝:Tube |
發布緊急采購，3分鐘左右您將得到回復。