- 您現在的位置：買賣IC網 > PDF目錄9406 > DS1306E+ (Maxim Integrated Products)IC RTC SERIAL ALARM 20-TSSOP PDF資料下載
參數資料
| 型號： | DS1306E+ |
| 廠商： | Maxim Integrated Products |
| 文件頁數： | 4/22頁 |
| 文件大小： | 0K |
| 描述： | IC RTC SERIAL ALARM 20-TSSOP |
| 產品培訓模塊： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 標準包裝： | 74 |
| 類型： | 時鐘/日歷 |
| 特點： | 警報器，閏年，NVSRAM，方波輸出，涓流充電器 |
| 存儲容量： | 96B |
| 時間格式： | HH:MM:SS（12/24 小時） |
| 數據格式： | YY-MM-DD-dd |
| 接口： | SPI |
| 電源電壓： | 2 V ~ 5.5 V |
| 電壓 - 電源，電池： | 2 V ~ 5.5 V |
| 工作溫度： | 0°C ~ 70°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 20-TSSOP（0.173"，4.40mm 寬） |
| 供應商設備封裝： | 20-TSSOP |
| 包裝： | 管件 |
| 產品目錄頁面： | 1433 (CN2011-ZH PDF) |
DS1306
12 of 22
ADDRESS AND DATA BYTES
Address and data bytes are shifted MSB first into the serial data input (SDI) and out of the serial data
output (SDO). Any transfer requires the address of the byte to specify a write or read to either a RTC or
RAM location, followed by one or more bytes of data. Data is transferred out of the SDO for a read
operation and into the SDI for a write operation (Figures 6 and 7).
Figure 6. SPI SINGLE-BYTE WRITE
Figure 7. SPI SINGLE-BYTE READ
The address byte is always the first byte entered after CE is driven high. The most significant bit (A7) of
this byte determines if a read or write takes place. If A7 is 0, one or more read cycles occur. If A7 is 1,
one or more write cycles occur.
Data transfers can occur one byte at a time or in multiple-byte burst mode. After CE is driven high an
address is written to the DS1306. After the address, 1 or more data bytes can be written or read. For a
single-byte transfer, one byte is read or written and then CE is driven low. For a multiple-byte transfer,
however, multiple bytes can be read or written to the DS1306 after the address has been written. Each
read or write cycle causes the RTC register or RAM address to automatically increment. Incrementing
continues until the device is disabled. When the RTC is selected, the address wraps to 00h after
incrementing to 1Fh (during a read) and wraps to 80h after incrementing to 9Fh (during a write). When
the RAM is selected, the address wraps to 20h after incrementing to 7Fh (during a read) and wraps to
A0h after incrementing to FFh (during a write).
* SCLK CAN BE EITHER POLARITY.
SERMODE = VCC
相關PDF資料 |
PDF描述 |
|---|---|
| MS3121F14-18PY | CONN RCPT 18POS CBL MNT W/PINS |
| MS27473T16F6PD | CONN PLUG 6POS STRAIGHT W/PINS |
| D38999/26WE8PD | CONN PLUG 8POS STRAIGHT W/PINS |
| D38999/26FE8PC | CONN PLUG 8POS STRAIGHT W/PINS |
| DS1682S+ | IC TIMEKEEPER ALARM ELAPSE 8SOIC |
相關代理商/技術參數 |
參數描述 |
|---|---|
| DS1306E/T&R | 制造商:Maxim Integrated Products 功能描述:IC RTC SERIAL ALARM 20-TSSOP |
| DS1306E/T&R | 功能描述:實時時鐘 RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 總線接口:I2C 日期格式:DW:DM:M:Y 時間格式:HH:MM:SS RTC 存儲容量:64 B 電源電壓-最大:5.5 V 電源電壓-最小:1.8 V 最大工作溫度:+ 85 C 最小工作溫度: 安裝風格:Through Hole 封裝 / 箱體:PDIP-8 封裝:Tube |
| DS1306E/TR | 制造商:DALLAS 制造商全稱:Dallas Semiconductor 功能描述:Serial Alarm Real-Time Clock |
| DS1306E+ | 功能描述:實時時鐘 Serial Alarm RTC 3-Wire RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 總線接口:I2C 日期格式:DW:DM:M:Y 時間格式:HH:MM:SS RTC 存儲容量:64 B 電源電壓-最大:5.5 V 電源電壓-最小:1.8 V 最大工作溫度:+ 85 C 最小工作溫度: 安裝風格:Through Hole 封裝 / 箱體:PDIP-8 封裝:Tube |
| DS1306E+T&R | 制造商:Maxim Integrated Products 功能描述:S ALARM RTC 20 TSSOP T&R LFREE 制造商:Maxim Integrated Products 功能描述:REAL TIME CLOCK SERL 96BYTE 20TSSOP - Tape and Reel 制造商:Maxim Integrated Products 功能描述:IC RTC SERIAL ALARM 20-TSSOP 制造商:Maxim Integrated Products 功能描述:Real Time Clock Serial Alarm RTC 3-Wire |
發布緊急采購，3分鐘左右您將得到回復。