參數資料
型號： DS1244WP-120IND
廠商： Maxim Integrated Products
文件頁數： 10/20頁
文件大?。?/td> 0K
描述： IC NVSRAM 256KBIT 120NS 34PCM
標準包裝： 40
類型： Phantom 計時芯片
特點： 閏年，NVSRAM
存儲容量： 32KB
時間格式： HH:MM:SS:hh（12/24 小時）
數據格式： YY-MM-DD-dd
接口： 并聯
電源電壓： 2.97 V ~ 3.63 V
電壓 - 電源，電池： 3V
工作溫度： -40°C ~ 85°C
安裝類型： 表面貼裝
封裝/外殼： 34-PowerCap? 模塊
供應商設備封裝： 34-PowerCap 模塊
包裝： 管件
DS1244/DS1244P
18 of 20
AC TEST CONDITIONS
Output Load: 50pF + 1TTL Gate
Input Pulse Levels: 0 to 3V
Timing Measurement Reference Levels
Input: 1.5V
Output: 1.5V
Input Pulse Rise and Fall Times: 5ns
NOTES:
1) WE is high for a read cycle.
2) OE = VIH or VIL. If OE = VIH during write cycle, the output buffers remain in a high-impedance
state.
3) tWP is specified as the logical AND of CE and WE . tWP is measured from the latter of CE or WE
going low to the earlier of CE or WE going high.
4) tDH, tDS are measured from the earlier of CE or WE going high.
5) These parameters are sampled with a 50pF load and are not 100% tested.
6) If the CE low transition occurs simultaneously with or later than the WE low transition in Write
Cycle 1, the output buffers remain in a high-impedance state during this period.
7) If the CE high transition occurs prior to or simultaneously with the WE high transition, the output
buffers remain in a high-impedance state during this period.
8) If WE is low or the WE low transition occurs prior to or simultaneously with the CE low transition,
the output buffers remain in a high-impedance state during this period.
9) The expected tDR is defined as cumulative time in the absence of VCC with the clock oscillator
running.
10) tWR is a function of the latter occurring edge of WE or CE .
11) Voltages are referenced to ground.
12) RST (Pin 1) has an internal pullup resistor.
13) RTC modules can be successfully processed through conventional wave-soldering techniques as long
as temperature exposure to the lithium energy source contained within does not exceed +85°C. Post-
solder cleaning with water-washing techniques is acceptable, provided that ultrasonic vibration is not
used.
In addition, for the PowerCap:
1) Maxim recommends that PowerCap module bases experience one pass through solder reflow oriented
with the label side up (“l(fā)ive-bug”).
2) Hand soldering and touch-up: Do not touch or apply the soldering iron to leads for more than three
seconds.
– To solder, apply flux to the pad, heat the lead frame pad, and apply solder. To remove the part,
apply flux, heat the lead frame pad until the solder reflows, and use a solder wick to remove
solder.
相關PDF資料
PDF描述
VI-BN1-IU-F3 CONVERTER MOD DC/DC 12V 200W
VI-B1K-MW-B1 CONVERTER MOD DC/DC 40V 100W
VI-BN1-IU-F2 CONVERTER MOD DC/DC 12V 200W
DS1743-100IND IC RTC RAM Y2K 5V 100NS 28-EDIP
DS1386P-32-120 IC TIMEKEEPER RAM 256K 32-PCM
相關代理商/技術參數
參數描述
DS1244WP-120IND+ 功能描述:實時時鐘 256k NV SRAM w/Phantom Clock RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 總線接口:I2C 日期格式:DW:DM:M:Y 時間格式:HH:MM:SS RTC 存儲容量:64 B 電源電壓-最大:5.5 V 電源電壓-最小:1.8 V 最大工作溫度:+ 85 C 最小工作溫度: 安裝風格:Through Hole 封裝 / 箱體:PDIP-8 封裝:Tube
DS1244Y 制造商:Maxim Integrated Products 功能描述: 制造商:Maxim Integrated Products 功能描述:Real Time Clock, Non-Volatile, 28 Pin, Plastic, DIP
DS1244Y120 制造商:Maxim Integrated Products 功能描述:
DS1244Y-120 制造商:Maxim Integrated Products 功能描述:
DS1244Y-150 制造商:Rochester Electronics LLC 功能描述: 制造商:Maxim Integrated Products 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*