
A267
I
Product Specifications
Current rating
(Note 1)
Voltage rating
Crimping
Insulation Displacement
Crimping
250V AC
Insulation Displacement
100V AC
AWG
22 to 26:
2A
AWG 28
AWG 30
AWG 26
Wire size
: 1A
: 0.5A
: 1A
Wire size
Operating Temperature Range
Operating Humidity Range
Storage Temperature Range
Storage Humidity Range
I
UL·CSA Safety Standard File No.
UL
:E52653
CSA
:LR95109
-30 to 85
Note 2
40 to 80%
-10 to 60
Note 3
40 to 70%
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Item
Specification
Condition
1. Insulation Resistance
2. Withstanding voltage
3. Contact Resistance
4.
Single Insertion/Extraction Force
0.3N (30gf) min., 4.4N(450gf) min.
5. Vibration
No electrical discontinuity of 1μs or more
6.
Humidity (Steady state)
Contact resistance: 30m
ohms
max. Insulation resistance: 500M
ohms
min.
1000M
ohms
min.
No flashover or insulation breakdown.
30m
ohms
max.
500V DC
650V AC/1 minute
100mA
Measured by the square steel-made pin of 0.5
±
0.002mm
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of 40 and humidity of 90% to 95%
(-55
: 30 minutes
15 to 35
: 2 to 3 minutes
7. Temperature Cycle
Contact resistance: 30m
ohms
max. Insulation resistance: 1000M
ohms
min.
(-
85
: 30 minutes
15 to 35
: 2 to 3minutes) 5 cycles
Tin plated: 30 cycles
Gold plated:50 cycles
Flow:
250 for 10 seconds
Reflow:
8.
Durability (Mating/un-mating)
Contact resistance: 30m
ohms
max.
Manual soldering:
300 for 2 seconds
Manual soldering:
9.
Resistance to Soldering heat
No deformation of components affecting performance.
At the recommended temperature profile
300 for 3 seconds
I
Features of DF11 Insulation Displacement Machine
(Single Core Punching Full Automatic ID Machine AM700/DF11)
G
5 Major Features of ID Machine AM700/DF11
1. Perform the multi-harness.
2. The setup time has been widely reduced. (10 minutes maximum)
3. Space saving design.
(About half space compared with the conventional machine)
4. Minimize initial cost with low cost.
5. The harness data can be saved in the floppy disk and easily
changed.
I
Points
Since the DF11 insulation displacemention allows double rows ID with a single part, the harness service is completed with
machine connection only.
Rating
Current rating
Voltage rating
UL-CSA Safety Standard Approved Specification
30V AC
AWG 22
AWG
24 to 28
: 1A
AWG 30
: 2A
Wire size
: 0.5A
Rating
Data storage
Low cost
Multi-harness
Half space
Setup in 10 minutes