![](http://datasheet.mmic.net.cn/140000/DD62M00000-AA_datasheet_4761663/DD62M00000-AA_4.png)
56
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
D
S
E
R
IE
S
D-Sub
Positronic Industries
connectpositronic.com
MILITARY QUALITY
FIXED AND REMOVABLE CONTACTS
HIGH DENSITY D-SUBMINIATURE
0.179 [4.55]
0.843 [21.41]
0.066
[1.68]
0.045
[1.14]
0.179 [4.55]
0.853 [21.67]
0.066
[1.68]
0.045
[1.14]
0.030
[0.76]
Crimp area extends above connector molding.
MALE CONTACT
FEMALE CONTACT
“CLOSED ENTRY” DESIGN
FEMALE
PART NUMBER
WIRE SIZE
AWG/[mm2]
FC8020D2
20 [0.5] max
MALE
PART NUMBER
WIRE SIZE
AWG/[mm2]
MC8020D
20 [0.5] max
Note: Connectors can be kitted with
all applicable crimp contacts,
contact Technical Sales for
connector part number.
For information regarding crimp tool and crimping tool techniques, see Application Tools section, pages 78-83.
* Color Code
0.150 [3.81]
0.030
[0.76]
0.150 [3.81]
* Color Code
0.520 [13.21]
0.047
[1.19]
0.035
[0.89]
0.531 [13.49]
0.047
[1.19]
0.035
[0.89]
For more information on the availability
of Type J thermocouple contacts,
please contact Technical Sales.
For more information about
thermocouple contacts with PCB
solder termination, please contact
Technical Sales..
Chromel and Alumel are registered trademarks
of Hoskins Manufacturing Company
TYPE
MATERIAL
FEMALE
PART NUMBER
MALE
PART NUMBER
COLOR
CODE*
WIRE SIZE
AWG [mm2]
K
CHROMEL (+)
FC8022D2CH
MC8022DCH
WHITE
22 / 24 / 26
[ 0.3 / 0.25 / 0.12]
ALUMEL (-)
FC8022D2AL
MC8022DAL
GREEN
22 / 24 / 26
[ 0.3 / 0.25 / 0.12]
T
COPPER (+)
FC8022D2CU
MC8022DCU
RED
22 / 24 / 26
[ 0.3 / 0.25 / 0.12]
CONSTANTAN (-)
FC8022D2CO
MC8022DCO
YELLOW
22 / 24 / 26
[ 0.3 / 0.25 / 0.12]
E
CHROMEL (+)
FC8022D2CH
MC8022DCH
WHITE
22 / 24 / 26
[ 0.3 / 0.25 / 0.12]
CONSTANTAN (-)
FC8022D2CO
MC8022DCO
YELLOW
22 / 24 / 26
[ 0.3 / 0.25 / 0.12]
MALE CONTACT
REMOVABLE THERMOCOUPLE CRIMP CONTACT
CONTACTS MAY BE SUPPLIED WITH CONNECTOR OR ORDERED SEPARATELY.
FEMALE CONTACT
“CLOSED ENTRY” DESIGN
Note: Connectors can be kitted with
all applicable crimp contacts,
contact Technical Sales for
connector part number.
PLATING:
STANDARD FINISH: Gold flash over nickel plate.
OPTIONAL FINISHES: 0.000030 [0.76] gold over nickel by adding “-14” suffix onto part number. Example: FC8020D2-14
0.000050 inch [1.27] gold over nickel by adding “-15” suffix onto part number. Example: MC8020D-15
Note: FC8020D2
and MC8020D
contacts can
be used in the
ODD series.
The crimp area of this contact is not
protected when fully seated in the
connector molding. These contacts
require shrink tubing after installation.
Not suitable for fully loaded connector.
REMOVABLE CRIMP CONTACT
20 AWG CONTACTS
20 AWG [0.5 mm2]
CONTACTS MAY BE SUPPLIED WITH CONNECTOR OR ORDERED SEPARATELY.