參數資料
型號: D4A-3311N
元件分類: 開關
英文描述: SNAP ACTING/LIMIT SWITCH, SPDT, MOMENTARY, 10A, 14VDC, 6.7mm, PANEL MOUNT
文件頁數: 5/24頁
文件大?。?/td> 945K
代理商: D4A-3311N
86
General-purpose Limit Switch
D4A-
@N
Head and Lever Positions
The operating head can be positioned and locked in any of four 90
° positions and a lever can lock in any position through 360° around the shaft of
the Limit Switch. Furthermore, the lever can be reversed and attached to the shaft (refer to the figures below on the right hand side). Therefore the
roller is compatible with a wide movement range of a dog. A Fork Lever Lock can be used with maintained models (D4A-0005N) only.
Lighting Mode Selection of Indicators
The lighting mode of the operation indicator can be changed easily between two modes: lighting when the Switch is operating and lighting when
the Switch is not operating.
Loosen the screw
to adjust the
length of the rod.
Loosen the bolt to
adjust the length
of the lever.
Adjustable
between 33
and 91 mm
D4A-E00
D4A-E10
D4A-E20
D4A-E30
Four, M4 x 12
Remove the head from the Switch by
loosening the screws (the screws can be
loosened but not removed from the
head).
The operating head can be
positioned and locked in
any of four 90
° positions.
The lever can lock in any position through 360
° around
the shaft. The lever can be reversed and attached to the
shaft, in which case the switching operation should com-
plete in a range of 0
° to 180°.
By loosening the Allen-head bolt on an adjustable roller lever
or rod lever, the length of the lever can be adjusted.
D4A-C00
D4A-D00
180
° operating
position
360
°
operating
position
There are four kinds of fork lever locks. The position of each
roller is different. It is possible to use D4A-E00 through
D4A-E30 levers instead, if they are reversed before attaching.
They can be used with D4A-
@@05N models only.
Lights When Not Operating
Lights When Operating
Note: 1. The lamp is lit when the actuator is at the free position.
The lamp will be off when the contacts of the Limit
Switch have been actuated and snapped to each other
at the operating position.
2. The lamp is lit when the contacts have been released
and snapped only from the operating position.
(See note 1.)
(See note 2.)
2
3
4
1
Load
Power supply
Built-in switch
Internal circuits
3
4
2
1
Built-in switch
Load
Power supply
Internal circuits
相關PDF資料
PDF描述
DC3BU3LD SNAP ACTING/LIMIT SWITCH, SPST, MOMENTARY, PANEL MOUNT
DC1CE7SD SNAP ACTING/LIMIT SWITCH, SPDT, MOMENTARY, 1A, 48VDC, THROUGH HOLE-RIGHT ANGLE
DC3AK8LD SNAP ACTING/LIMIT SWITCH, SPST, MOMENTARY, THROUGH HOLE-RIGHT ANGLE
DT22J2GG215PQA8 ROCKER SWITCH, DPST, LATCHED, PANEL MOUNT
D102J12S1ADQF ROCKER SWITCH, SPST, LATCHED, THROUGH HOLE-RIGHT ANGLE
相關代理商/技術參數
參數描述
D4A3315N 制造商:OMRON AUTOMATION AND SAFETY 功能描述:LSW CAT WHISKER LEVER W/LAMP 制造商:OMRON INDUSTRIAL AUTOMATION 功能描述:Switch Limit N.O./N.C. SPDT Cat Whisker Conduit 10A 600VAC 250VDC 1.47N Rotary Screw Mount
D4A-3315N 功能描述:限位開關 LSW CAT WHISKER LEV ER W/LAMP RoHS:否 制造商:Honeywell 觸點形式:SPDT 執行器:Non-Contact 電流額定值:30 mA 電壓額定值 AC: 電壓額定值 DC:3.6 V 工作力:10 g IP 等級:IP 67 NEMA 額定值:1, 4, 12, 13 端接類型:4-Pin M12 Connector 安裝:SMD/SMT
D4A3E01N 制造商:OMRON AUTOMATION AND SAFETY 功能描述:LSW 6A 24VDC LED SPDT PF 1/2 制造商:OMRON INDUSTRIAL AUTOMATION 功能描述:Switch Limit N.O./N.C. SPDT Side Roller Lever Conduit 10A 600VAC 250VDC Rotary Screw Mount
D4A-3E01N 功能描述:限位開關 LSW 6A 24VDC LED SPD T PF 1/2 RoHS:否 制造商:Honeywell 觸點形式:SPDT 執行器:Non-Contact 電流額定值:30 mA 電壓額定值 AC: 電壓額定值 DC:3.6 V 工作力:10 g IP 等級:IP 67 NEMA 額定值:1, 4, 12, 13 端接類型:4-Pin M12 Connector 安裝:SMD/SMT
D4A3E01NGM 功能描述:基本/快動開關 RoHS:否 制造商:Omron Electronics 觸點形式:SPDT 執行器:Lever 電流額定值:5 A 電壓額定值 AC:250 V 電壓額定值 DC:30 V 功率額定值: 工作力:120 g IP 等級:IP 67 NEMA 額定值: 端接類型:Wire 安裝:Panel